1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Eibach Pro Sportlines fitted along with Forge Diverter and Cupra Splitter

Chris-Vspec May 11, 2013

  1. Chris-Vspec

    Chris-Vspec Member

    248
    43
    18
    I have been busy over the past few weeks getting parts to go on the car, so wanted to pop a few pics up of what I have done and how we did it.

    first off the Eibachs........ OMG What a difference anyone who hasn't done this, seriously do it. I know tiffy has covered this but car rides so much better than standard s line set up, handling is greatly improved and the look. Here's a few rubbish iPhone pics I took while my mechanic friend was fitting them. I bought the replacement pinch bolts just in case but there was a much easier way of doing it leaving them untouched.

    [​IMG]

    [​IMG]

    [​IMG]

    strut removed, now for new shiny spring..

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    the process was the same the other side and the backs were easy.

    [​IMG]

    once the suspension was done we started on the forge, was hard to take pics so there are only a few..

    [​IMG]

    removed old diverter, replaced with this.

    [​IMG]

    we then tackled the Cupra splitter, what a great transformation.

    [​IMG]

    [​IMG]

    will get some better pics of ride height and splitter when the weather improves. The forge diverter on the 2.0tfsi is a must, the car no longer feels flat, everything has been sharpened up with the throttle response and power release after gear changes, had it all done in time for remap next week :) :)

    next mod to have done is wheels... Car going in Sunday watch this space.....
     
    TOM.S likes this.
  2. Macdoon

    Macdoon Well-Known Member Team Ibis TFSI Owners Group Gold Supporter Audi A4 S-line owners group

    2,023
    793
    113
    Well done pal
     
  3. Tiffy

    Tiffy Active Member

    363
    89
    28
    Looks well mate
     
  4. jdp1962

    jdp1962 Grumpy Old Moderator Staff Member Moderator TFSI Owners Group Team V6 Gold Supporter Team Tornado Audi S4 quattro Black Edition s tronic

    8,351
    2,888
    113
    That's a nice looking car.
     
  5. Sandra

    Sandra Administrator Staff Member Administrator TeamMisano TFSI Owners Group Audi S3 quattro s tronic Platinum Supporter Audi Main Dealer

    27,048
    10,021
    113
    Very tidy car, look forward to seeing the new wheels. :) x :salute:
     
  6. TOM.S

    TOM.S Active Member Silver Supporter

    564
    113
    43
    Some smart mods done there mate.
    Mine's coming up soon ;)
     
  7. Chris-Vspec

    Chris-Vspec Member

    248
    43
    18
    Thanks for all the comments, more to come soon, I would like to do the rear rs4 arb mod, if anyone has the part numbers I need that would be great
     
  8. sammi

    sammi Active Member

    345
    45
    28
    Car looks lovely Chris, it's been really worth the hard work xxx
     
    Last edited: May 11, 2013
  9. mancdan

    mancdan Active Member

    491
    51
    28
    What was the cost of the springs and cost of the Forge DV?
     
  10. Chris-Vspec

    Chris-Vspec Member

    248
    43
    18
    Springs were 167 from dpm motorsport and the forge was 207 delivered from forge direct, DPM also do the forge so if you ordered both together you may save a bit on the postage
     
  11. moggytom

    moggytom Member

    41
    3
    6
    looks awesome buddy :)
     
  12. Chris-Vspec

    Chris-Vspec Member

    248
    43
    18
    thank you
     
  13. jdp1962

    jdp1962 Grumpy Old Moderator Staff Member Moderator TFSI Owners Group Team V6 Gold Supporter Team Tornado Audi S4 quattro Black Edition s tronic

    8,351
    2,888
    113
    This thread might help.
     
    Chris-Vspec likes this.
  14. Chris-Vspec

    Chris-Vspec Member

    248
    43
    18
    thank you will have a look.


    Also new wheels are done...... Will post pics when it stops pouring down....
     

Share This Page