1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Dyno results

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by mikerd4, Aug 22, 2009.

  1. mikerd4
    Offline

    mikerd4 Member

    Joined:
    May 24, 2004
    Messages:
    170
    Likes Received:
    0
    Had my B6 S4 on a dyno today and we were mystified at the power it produced.
    Results of

    294 @ flywheel
    207 @ Wheels
    277.7 ft lb @flywheel

    Each run was better than the last which the operator suspected was the cats being cold. We had a problem with the traction control at first but that was sorted, I thought it might cause agro as its a tip but Nick the operator didnt think this is to fault.

    Im guessing/going to check the MAF - This can be read on vag com
    and a quick scan looked like it wasnt flowing freely (anyone able to tell me what I should be reading on vag com)?

    What other things can I check before I get worried
    #1
  2. mikerd4
    Offline

    mikerd4 Member

    Joined:
    May 24, 2004
    Messages:
    170
    Likes Received:
    0

Share This Page