DRL

[Peter Metcalf]

Hi all,
I've read somewhere that it's possible to increase the intensity of the front DRL's as these are set at about 9% brightness is this correct or is it ballony.
Regards


Sent from my iPhone using Tapatalk

 

[mattmanwrx]

What car, model, year?

 

[Peter Metcalf]

Sorry It's A6 c7 2013


Sent from my iPhone using Tapatalk

 

[mattmanwrx]

Can't see anything on Ross tech site.

Have seen this -

13. Enabling the Daytime Running Lights on/off setting in the MMI
Adding the option to turn off / turn on the DRLs via the MMI
[Select]
[09-Cent. Elect.]
[Coding - 07]
[Long Coding Helper]
Click on byte 3 and enable bit 0 (Daytime running lights adjustable via MMI)
[Do It!]

And this -

Disable DRL dim on turn signal
[Select]
[09 - Central Elec.]
[Security Access - 16]
Code: 20113
[Adaption - 10]
Channel 3
Set between 5 and 100
[Do It!]
(I found 50 to be a good setting)

And this -

Adjust brightness of DRLs when headlights are on
[Select]
[09-Cent. Elect.]
[Security Access - 16] (enter security code - 20113)
[Adaptation - 10]
Select Channel 03 and Read
Change the value from 5 to 100
Press Test then press Save

I guess that last one is what you want.

All taken from here - http://www.vwaudiforum.co.uk/forum/archive/index.php/t-132245.html

Hope this helps, Matt.

 

[Peter Metcalf]

Cheers Matt just need someone who has the VAG will check the map


Sent from my iPhone using Tapatalk

 

[mattmanwrx]

No problem fella. Hope you get what you want.

 

[Rjw76]

Going to try this, thank you!

 

[Rjw76]

Can't see anything on Ross tech site.

Have seen this -

13. Enabling the Daytime Running Lights on/off setting in the MMI
Adding the option to turn off / turn on the DRLs via the MMI
[Select]
[09-Cent. Elect.]
[Coding - 07]
[Long Coding Helper]
Click on byte 3 and enable bit 0 (Daytime running lights adjustable via MMI)
[Do It!]

And this -

Disable DRL dim on turn signal
[Select]
[09 - Central Elec.]
[Security Access - 16]
Code: 20113
[Adaption - 10]
Channel 3
Set between 5 and 100
[Do It!]
(I found 50 to be a good setting)

And this -

Adjust brightness of DRLs when headlights are on
[Select]
[09-Cent. Elect.]
[Security Access - 16] (enter security code - 20113)
[Adaptation - 10]
Select Channel 03 and Read
Change the value from 5 to 100
Press Test then press Save

I guess that last one is what you want.

All taken from here - http://www.vwaudiforum.co.uk/forum/archive/index.php/t-132245.html

Hope this helps, Matt.

Hi all,

I hope someone can help here - I have just tried to enable daytime running lights on/off setting as per details above. However, my byte 3 has no bit 0, and the other bits refer to seat heating, climate control, etc. Does this mean that I simply don't have the option of an on/off setting in my vehicle, or might there be another way of enabling this?

Thanks!