1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Door lights question

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by Mike.M, Oct 22, 2013.

  1. Mike.M

    Mike.M Well-Known Member

    Joined:
    Oct 11, 2003
    Messages:
    2,420
    Likes Received:
    158
    Well I have all the parts to install the red and white door lights but unsure which repair wire to get, when I put the feeds into the window mech 32pin grey connector.

    The part numbers I have found are:

    000 979 009
    000 979 133
    000 979 018

    all very similar to each other but no idea LOL

    I might just go to a breakers and cut a plug off and use them instead if no one knows.

    Cheers in advance :)
     
    #1 Mike.M, Oct 22, 2013
    Last edited: Oct 22, 2013
  2. Advert Guest Advertisement


  3. Mike.M

    Mike.M Well-Known Member

    Joined:
    Oct 11, 2003
    Messages:
    2,420
    Likes Received:
    158
    Sorted.........the repair wires needed are part number 000 979 018
     
    #2 Mike.M, Oct 22, 2013
    Last edited: Oct 22, 2013
  4. Jimmy TDI

    Jimmy TDI Pro Tinkerer
    Audi A4 Audi Avant Owner Group Audi Sport Owner Group TDi

    Joined:
    Dec 21, 2013
    Messages:
    1,312
    Likes Received:
    259
    Old thread, but no point starting a new one.

    Is it the below pictured plug that needs tapping in to when retrofitting these in the rear doors?

    this HTML class. Value is http://s611.pho

    I know it's the grey one for the fronts, but there are no pictures/description's of the rear plug other than which pins to use for the rears in any thread that I've found.
     
    #3 Jimmy TDI, Apr 4, 2016
    Last edited: Apr 4, 2016
  5. Jimmy TDI

    Jimmy TDI Pro Tinkerer
    Audi A4 Audi Avant Owner Group Audi Sport Owner Group TDi

    Joined:
    Dec 21, 2013
    Messages:
    1,312
    Likes Received:
    259
    Not sure whats happening here, but Photobucket isn't copying the img code for some reason?
     
  6. Jimmy TDI

    Jimmy TDI Pro Tinkerer
    Audi A4 Audi Avant Owner Group Audi Sport Owner Group TDi

    Joined:
    Dec 21, 2013
    Messages:
    1,312
    Likes Received:
    259
    [​IMG]
     
  7. Mike.M

    Mike.M Well-Known Member

    Joined:
    Oct 11, 2003
    Messages:
    2,420
    Likes Received:
    158
    In the end I took a feed off the front foot well lights to the seats and works well.
     
  8. Jimmy TDI

    Jimmy TDI Pro Tinkerer
    Audi A4 Audi Avant Owner Group Audi Sport Owner Group TDi

    Joined:
    Dec 21, 2013
    Messages:
    1,312
    Likes Received:
    259
    Thanks for the reply, but I don't really need footwell lighting due to the brightness of my interior leds.
    I just need to make sure I'm tapping into the correct plug for the door lights in the rear doors. It will probably be a bit clearer once I remove the cards, but it's always nice to have a good idea what your looking for before starting a job.
     
  9. vr6gordy

    vr6gordy Well-Known Member

    Joined:
    Mar 1, 2008
    Messages:
    2,712
    Likes Received:
    166
    Don't no if the rears are the same as front but the fronts you connect a wire to a pin on your window motor no need to run a wire into the car
     
  10. Jimmy TDI

    Jimmy TDI Pro Tinkerer
    Audi A4 Audi Avant Owner Group Audi Sport Owner Group TDi

    Joined:
    Dec 21, 2013
    Messages:
    1,312
    Likes Received:
    259
    Testicles!

    If it's the window motor I'm going to have to tap the rears into the fronts, as I've got keep fit rear windows.
     

Share This Page