1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dm forged rifle drilled rods anyone using them

s3gazz Jul 31, 2012

  1. s3gazz

    s3gazz Well-Known Member

    1,376
    99
    48
    just a quicky guys does anyone run the above rods can get them from the state good price just wondered if they were any good thanks
     
  2. Prawn

    Prawn My other car is a MINI!!!!

    11,413
    3,302
    113
    I have them, not yet fitted, but lovely looking bits of kit.

    Sam Bryant is running them in his engine, as are many others on the Seat forum.

    Welly also has a set in his new build.

    Bill looked at mine, and said they were very much identical to the IE rods I believe.

    Good kit as far as I'm concerned (Y)
     
  3. Jpd89

    Jpd89 Member

    118
    1
    18
    How much are these out of interest?
     
  4. Dani_B19

    Dani_B19 Audi-sports own special child.

    9,109
    346
    83
    Pluss one gazz, how much can you them for?
     
  5. Ronin225

    Ronin225 SEAT owner

    81
    2
    8
    They are made by Issam from INA, i have a set of rifle drilled ones for my stroker kit
     
  6. Dani_B19

    Dani_B19 Audi-sports own special child.

    9,109
    346
    83
    What cc stroker you going for Ronin?
     
  7. Ronin225

    Ronin225 SEAT owner

    81
    2
    8
    Already have it but not fitted yet, 2008cc kit using the 83mm pistons, 2 litre TFSI crank and 144x20 rods
     
  8. Dani_B19

    Dani_B19 Audi-sports own special child.

    9,109
    346
    83
    Very nice. What turbo you ptting with that then?
     
  9. Ryan_W

    Ryan_W Member

    336
    6
    16
    I'm looking to purchase a set of these too for my build. Haven't heard anything bad about them.
     
  10. badger5

    badger5 www.badger5.co.uk Site Sponsor

    9,400
    1,944
    113
    if on 1.8t block 144x20, but special pistons which have different pin height
     
  11. beachbuggy

    beachbuggy Well-Known Member

    1,931
    201
    63
    Didn't mean to delete that last post.

    So the 2.0tfsi is the same as the 1.8t just stronger and different pistons needed. Cool.
     
  12. badger5

    badger5 www.badger5.co.uk Site Sponsor

    9,400
    1,944
    113
    not sure what you mean by stronger dan?

    tfsi crank when used in transverse 1.8t strokers has the oil pump drive sweated on, and special pistons which alter the pin height..

    92,8mm crank on 82.5mm pistons in a 1984cc ABF engine for example has 159mm rods, but its block is some 15mm taller measuring crudely from base to top of block.
     
  13. Ronin225

    Ronin225 SEAT owner

    81
    2
    8
    I have a GT2871R kit but being as i decided to have a go at making the leon 4WD (hence me joining here as i will be using S3 rear end) i thought i'll go even bigger.
    Looking into the 500's now, some the new borgwarner EFR series are very tempting
     
  14. s3gazz

    s3gazz Well-Known Member

    1,376
    99
    48
    emm very good then no bad points ill be ordering in the next few day to reserve some hes out of stock at the min for three week
     
  15. jezzy

    jezzy Member

    768
    16
    18
    4wd leon just perfect.
    Wanted a leon but the audi 4wd swung it for me.
    o please keep us updated.
     
  16. *P3nfold*

    *P3nfold* Member

    368
    15
    18
    Gazz have you received your rods yet?
     
  17. Paradox1

    Paradox1 Active Member

    1,833
    88
    38
    Anyone?
     
  18. s3gazz

    s3gazz Well-Known Member

    1,376
    99
    48
    Doing my build now pal head off tomoz waiting on new rods so not yet ha.

    There in a kit or on there own I no the kit is 830 dollars think about 500 dollars for the rods pal
     
  19. Paradox1

    Paradox1 Active Member

    1,833
    88
    38
    Cheers gazz,will have to invest
     
  20. S3 TAM

    S3 TAM Pocket now empty

    624
    10
    18
    where are u guys buying these rods from?

    INA website doesn't seem to work for me...
     
  21. StaceyS3

    StaceyS3 Well-Known Member

    2,489
    473
    83
    You have to email him mate ;)
     
  22. S3 TAM

    S3 TAM Pocket now empty

    624
    10
    18
    how much are they?

    or is it top secret :ninja:
     
  23. Jpd89

    Jpd89 Member

    118
    1
    18
    ^

    ;)
     
  24. s3gazz

    s3gazz Well-Known Member

    1,376
    99
    48
    join the relentless facebook group all on there lads
     

Share This Page