1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cylinder 2 Glow Plug Circuit

Discussion in 'A3/S3/Sportback (8P Chassis)' started by navnayyar, Dec 15, 2009.

  1. navnayyar
    Offline

    navnayyar Member

    Joined:
    Mar 23, 2008
    Messages:
    786
    Likes Received:
    0
    [Dec 15, 2009]
    just brought a new vag-com cable and decided to test it on my car. was shocked to see the following fault:
    Address 01: Engine Labels: 03G-906-016-BKD.lbl
    Control Module Part Number: 03G 906 016 G HW: 028 101 136 4
    Component and/or Version: R4 2,0L EDC 0000SG 5705
    Software Coding: 0000072
    Work Shop Code: WSC 00066 001 57865
    1 Fault Found:
    17056 - Cylinder 2 Glow Plug Circuit (Q11): Electrical Fault
    P0672 - 000 - -
    Freeze Frame:
    RPM: 0 /min
    Torque: 164.0 Nm
    Speed: 0.0 km/h
    Load: 0.0 %
    Voltage: 11.48 V
    Bin. Bits: 11000100
    Temperature: 6.3°C
    Bin. Bits: 00110000

    I didnt think much of it and thought it was a previous fault and not been reset. I then reset the whole thing and came up with the same thing:
    Address 01: Engine Labels: 03G-906-016-BKD.lbl
    Part No SW: 03G 906 016 G HW: 028 101 136 4
    Component: R4 2,0L EDC 0000SG 5705
    Revision: 12345678 Serial number: AUX7Z0CNFN5008
    Coding: 0000072
    Shop #: WSC 00066 001 57865
    1 Fault Found:
    17056 - Cylinder 2 Glow Plug Circuit (Q11): Electrical Fault
    P0672 - 000 - -
    Freeze Frame:
    RPM: 0 /min
    Torque: 148.0 Nm
    Speed: 0.0 km/h
    Load: 0.0 %
    Voltage: 11.63 V
    Bin. Bits: 11000100
    Temperature: 7.2°C
    Bin. Bits: 00110000
    Readiness: 0 0 0 0 0

    Does anyone know what this fault means? do i need new glow plugs?
    cheers guys
    #1
  2. Ads

    Ads

    [Dec 25, 2014]

Share This Page