1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cupra R splitter Fitted to Votex front

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by dpbayly, Nov 28, 2012.

  1. dpbayly
    Offline

    dpbayly Member

    Joined:
    Oct 21, 2012
    Messages:
    368
    Likes Received:
    1
    Well I've been toying with the idea of fitting one of these for a couple of weeks and after seeing a few pics of them fitted to the Votex splitter's none of which gave you a real good view which made my decision a little more difficult,

    But in the end decided what the hell I'll give it a go and got one from TPS and slapped it on.

    Took around 25 mins with the use of a ramp at work

    Its definitely not going to fall off....

    [​IMG]

    I was relatively happy the only thing i didn't like was the gap you could see through on the inside edge, the gap is also there on the sport bumper but not as bad:

    [​IMG]

    So i made a card template and from that cut 2 infill pieces from black plastic:

    [​IMG]

    And once fitted i was far more happier with the way it looked/fitted:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
    #1
  2. Point_Audi
    Offline

    Point_Audi Vorsprung durch Technik Regional Rep

    Joined:
    May 22, 2010
    Messages:
    646
    Likes Received:
    4
    Looks really well mate, it certainly won't come off anyway!lol ..
    #2
  3. Slinepete
    Offline

    Slinepete Member

    Joined:
    Jul 30, 2012
    Messages:
    306
    Likes Received:
    1
    Looking good still need to do this myself
    #3
  4. V6 Quatt
    Offline

    V6 Quatt Member

    Joined:
    Feb 29, 2008
    Messages:
    817
    Likes Received:
    4
    Nice

    How much from TPS
    #4
  5. Paul @ Unit
    Offline

    Paul @ Unit Active Member

    Joined:
    Aug 10, 2009
    Messages:
    1,332
    Likes Received:
    1
    i was going to do this but got the proper votex air damn instead. looks odd to me as it doesnt line up for the lines of the bumper
    #5
  6. dpbayly
    Offline

    dpbayly Member

    Joined:
    Oct 21, 2012
    Messages:
    368
    Likes Received:
    1
    Thanks,

    £34.96
    #6
  7. dpbayly
    Offline

    dpbayly Member

    Joined:
    Oct 21, 2012
    Messages:
    368
    Likes Received:
    1
    Had no idea they made anything for the Votex....

    Got any Pics??
    #7
  8. Paul @ Unit
    Offline

    Paul @ Unit Active Member

    Joined:
    Aug 10, 2009
    Messages:
    1,332
    Likes Received:
    1
    #8
  9. dpbayly
    Offline

    dpbayly Member

    Joined:
    Oct 21, 2012
    Messages:
    368
    Likes Received:
    1
    cool...
    #9
  10. Mike.M
    Offline

    Mike.M Active Member

    Joined:
    Oct 11, 2003
    Messages:
    1,619
    Likes Received:
    3
    Good effort but I prefer the Vortex without it or even better the vortex with the smaller one mentioned above......I think it fits better on the GMBH S-line lower personally.

    Very good work so far but :)
    #10
  11. swarcup
    Offline

    swarcup Active Member

    Joined:
    Sep 9, 2009
    Messages:
    1,284
    Likes Received:
    1
    carefull when pulling upto kerbs with the front, i have just ripped mine off mines on the gmbh sport front also on standard sport suspension, could cause some serious damage on yours as its fixed on so well. looks good
    #11

Share This Page