1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

cruise control

Discussion in 'A3/S3/Sportback (8P Chassis)' started by ahtcap, Jan 10, 2014.

  1. ahtcap
    Offline

    ahtcap Member

    Joined:
    Sep 12, 2009
    Messages:
    40
    Likes Received:
    1
    Please could anyone give me guidance on fitting cruise control .I have a a3 tdi sport back 2005.(with an onboard computer)
    I've just rung Audi (Bolton). I gave them my reg number and they said I would need a new steering module as mine is not compatible. Would they be correct or would they be guessing?
    #1
  2. NHN
    Offline

    NHN Modmetractor

    Joined:
    Jan 14, 2008
    Messages:
    27,226
    Likes Received:
    1,220
    Only way to know 100% is to check with vcds, although if you have a dis then it should be possible to fit.
    #2
  3. ahtcap
    Offline

    ahtcap Member

    Joined:
    Sep 12, 2009
    Messages:
    40
    Likes Received:
    1
    Using vcds what would i look under?
    #3
  4. Dannykn9
    Offline

    Dannykn9 "Cruise My Ride"

    Joined:
    May 14, 2011
    Messages:
    1,117
    Likes Received:
    53
    Mate, if you already have an on board computer with trip stalk, then you 100% have the correct module.
    Dealers know jack and don't have no real knowledge. Even if you had a MFSW, they would still have said you still need a new module.

    Chances are high you have the AH module which is totatally fine.

    But if you want to check with VCDS for peace of mind, check the P/N in steering module 16. It should begin 1K0 and end AH if you currently just have trip.
    #4

Share This Page