1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cruise control part number

johnnevett Jul 22, 2013

  1. johnnevett

    johnnevett Member

    245
    19
    18
    Hi
    does anyone know the correct part number for the cruise control stalk unit for an 08 audi a4. Reg yf08 vrm
    ive seen this one 8K0953502BD but have been told Option codes; BD adds 9Q7 & 9Q8, for the Fuel computer which is not on your A4 but I do have the fuel computer. Is this right. Cheers
     
  2. Tolak

    Tolak Member

    233
    19
    18
    Seems like BD would be ok for the saloon, with fuel computer, and you would need BK for the avant.
    Note that the switches are a single block, you cannot easily mix and match modules from your old set and the new set.
    (Echoes of lesson learnt the hard way...)
     
  3. Slackworth

    Slackworth Active Member Team Silver Audi A4 saloon TDi

    349
    62
    28
    I fitted BD to my 08 Saloon with 9Q4...it works fine but there is an additional code change in VCDS required in addition to programming the cruise control in.

    If you Adaptive Cruise or Lane Departure then you need a different part number. As above Avant is different as well.

    If you wanted main beam to stay on the stalk would lock when pushed away from you. The BD stalk however doesn't and springs back. A quick change on the Central Electric module will sort this though.
     

Share This Page