1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

cruise and dis coding

mattyboyc Oct 28, 2010

  1. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    Hi all, i know a few of you have done this upgrade but i would like an honest opinion on how easy the coding is, i have a pucker vag-com lead and all the tools/ facilitys to do the hardware install just a little concerned as to the coding, i'm not 100% on how to work out the new inputs, i shall be attemting some other changes via vag-com as i have finally sourced a later comfort module to be
    able to code my B7 keys,
    Thanks in advance,
    Matt
     
  2. gary3306

    gary3306 Active Member VCDS Map User

    989
    40
    28
  3. rob irl tdi

    rob irl tdi Member

    240
    1
    16
    I found it handy enough Matt

    Robbie
     
  4. swarcup

    swarcup Well-Known Member

    1,326
    40
    48
    i used that document with no prior knowledge of vag-com and had it all done in under 5mins. dead easy
     
  5. fourcircle

    fourcircle nj

    927
    27
    28
    Does anyone know where to find the part number on a steering control module? quattrojames has posession of one I ordered but can't see the p/n.
    cheers
     
  6. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    The part number ois on a white sticker on the top of the sccm
     
  7. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    Hmmmm... well there is a slight sticky mark where forementioned sticker used to be .....

    Is there any visible difference between the different derivatives?
     
    Last edited: Nov 4, 2010
  8. fourcircle

    fourcircle nj

    927
    27
    28
    Bugger
     
  9. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    Could be the amount of plugs on it for the different stalks, clutching at straws really.
     
  10. fourcircle

    fourcircle nj

    927
    27
    28
    the control module was attached to the wiper/DIS stalk when I bought it. The stalk is 4E0 953 503 C but I don't know if there's any way to tie this up to a specific module or range of modules?
     
  11. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    What are you trying to do?
     
  12. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    The only way i can think of for sure is to fit it and do a vagcom scan that will read the modules fitted
     
  13. fourcircle

    fourcircle nj

    927
    27
    28
    looks like that's what will need to happen mate.
    I'm going to retro fit DIS and cruise control. I bought everything from one person on ebay but that's not a guarantee that it's the right sccm. James kindly took delivery of those bits and a few others to send on to me.
     
  14. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    If it was already fitted should be a fair chance the module does both cruise and dis, i gave up looking on the bay and new seems an expensive upgrade for something i proberbly won't use anyway hense why i'm selling my module, i have cruise fitted in the lorry and don't use it.
     
  15. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    what does the 4 in the part number denote as i have a part number of 8E0 953 503 C for a B6 Avant dis stalk?
     
  16. fourcircle

    fourcircle nj

    927
    27
    28
    the 4 means it's from a B7 as far as I know. Although I bought it all from one seller the CC stalk wasn't fited to the rest so he had the components but hadn't actually fitted them. hence I don't know for sure if the sscm is compatible with CC. It will def do DIS since that wiper arm is attache dto the module already (well.. I bloody hope so)
    So are you selling the stalk or the sscm or both?
     
  17. mattyboyc

    mattyboyc B6 Veteran Audi A4 Audi Avant Owner Group TDi

    1,869
    176
    63
    Only the sccm as i haven't managed to find any used stalks the part number of my sccm is 8E0 953 549 P compatible with both cruise and dis but not mfsw, i can't believe though that yours will only do dis and not cruise,surely they aren't going to make loads of different sccm's
     
  18. fourcircle

    fourcircle nj

    927
    27
    28
    god bless german over engineering. yep, it's possible to get those that do DIS but not CC.
     
    Last edited: Nov 4, 2010

Share This Page