1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

connecting audio from a video screen

Sayre Sep 14, 2006

  1. Sayre

    Sayre Member

    59
    0
    6
    Hey guys I just hooked up a Screen in my 2000 Audi S4 with the Bose symphony radio I have everything figured out except how to hook up the audio. Does anyone here know how I can get this plug to play though my radio?

    [​IMG]
     
  2. AndyMac

    AndyMac Moderator Staff Member Moderator

    9,833
    45
    38
    you'll need Denison ICELink or similar as the only audio input is on the CD changer connection, but you can't just unlpug it as then the HU won't recognise the changer as a legitimate source, so you have to buy some electronics to fool the HU into thinking the changer is still connected.
    If you're handy with a soldering iron then you can just snip the audio in lines on the changer bus connector and connect to these, leaving the data bus for the changer still connected. Some people have even hardwired in a switch so they can flip between iPOD/screen and changer when needed.
     
  3. Sayre

    Sayre Member

    59
    0
    6
    Andy, do you know of any how to articles on this or one similiar? i am pretty good with a soldering iron
     
  4. AndyMac

    AndyMac Moderator Staff Member Moderator

    9,833
    45
    38
    Have a look in the Tech Articles / electrical on audiworld.com
     

Share This Page