1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

chirp when locking / unlocking car

Aspen Mar 18, 2009

  1. Aspen

    Aspen Member VCDS Map User

    153
    9
    18
    Just had a play with vagcom, and tried to enable the chirp when opening the doors via remote.

    option 3 isn't an option on my S3. Wierd.

    The display box pops up saying what each otion does, but when i click up and down it goes from 1 - 2 no 3 , same when i enter it manually. it doesn't register.

    Any ideas?

    Andy
     
  2. Gti Jazz Blue

    Gti Jazz Blue Active Member VCDS Map User

    1,655
    7
    38
    You need to change the long coding on the 8P A3 platform to enable those functions.

    I would advise you to make sure that you do a full autoscan and save the results that way you will always have a note of the original coding of your S3.

    See http://en.openobd.org/audi/a3_8p.htm#46 for more info.

    Have fun.

    Regards,

    Paul
     
  3. Sebastian

    Sebastian Member

    286
    0
    16
    Agreed, an Auto-Scan makes answering easier. Of course enabling the chirping requires the car to have a factory fitted alarm installed.
     
  4. Aspen

    Aspen Member VCDS Map User

    153
    9
    18
    If a brand new S3 didn't have a factory alram I'd be very surprised.
    infact I think it's law on any new car in the UK.

    Right, about this long number malarki.

    Can someone give me step by step instructions on this as I'm obviously doing something wrong. I will do an autoscan first. Promise
     
  5. scottie123

    scottie123 (●̮̮̃•̃) (●&#

    1,972
    2
    36
    did you manage to do this ?

    if so, please can you tell me how :)
     
  6. hollows wife

    hollows wife Well-Known Member

    1,404
    164
    63
    module 46 central convenience , coding , long coding helper , copy and paste in note pad original coding just in case

    go through options in long coding helper and tick boxes for chirp on lock and unlock

    press escape button and coding will be transfered automatically

    should be done
     
  7. 1wheelonly

    1wheelonly cabriolet VCDS Map User

    2,386
    112
    63
    i think that ives you the capability, then you still need change the soft code to option 3, i may be wrong but if i remember right when i did someones, the long code is like an unlock to allow the option of addaption to go to 3
     

Share This Page