1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Changing Rear Discs and Pads A4 2003 Conv

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by Audi-A4-Conv-2003, Jan 21, 2010.

  1. Audi-A4-Conv-2003
    Offline

    Audi-A4-Conv-2003 New Member

    Joined:
    Jan 21, 2010
    Messages:
    1
    Likes Received:
    0
    Hi All,

    Can anybody advise with the changing of the Rear discs and pads on an audi A4 3.0 V6 conv 2003.

    I have recently changed the front which was quite easy, but the rear seem a little different....

    Are any special tools needed to complete the task?

    Anyone know of any online videos that show you how to do it?

    Your help/advice would be greatly appreciated.

    Thanks
    Alan.
    #1
  2. pjmspeedy
    Offline

    pjmspeedy Dude, what's mine say ?

    Joined:
    Apr 29, 2008
    Messages:
    1,058
    Likes Received:
    1
    The only difference in changing the rears to the fronts is that you need a caliper rewind tool to push the pistons back in. Other than that it is just as easy as the fronts.
    #2
  3. markyzs180
    Offline

    markyzs180 Member

    Joined:
    Apr 18, 2009
    Messages:
    543
    Likes Received:
    1
    as speedy says you'll need a rewind tool, think they are around 25 quid from machine mart/screwfix etc
    #3
  4. Les 51
    Offline

    Les 51 A pint of Diesel please!

    Joined:
    Feb 3, 2007
    Messages:
    687
    Likes Received:
    2
    it's easy enough to do, but as the others say get the rewind tool and make sure it fits your car (they do different ones). you can do it without, but it's a major pain! and takes forever to wind it back.
    #4
  5. jwhat
    Offline

    jwhat Member

    Joined:
    Oct 20, 2006
    Messages:
    540
    Likes Received:
    1

Share This Page