1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Changing Front Void Bushes / Engine Vibration Dampers / Haldex "Doughnut" Damper

Discussion in 'A3/S3/Sportback (8P Chassis)' started by Jonay, Oct 23, 2010.

  1. Jonay
    Offline

    Jonay Member

    Joined:
    May 31, 2010
    Messages:
    274
    Likes Received:
    0
    [Oct 23, 2010]
    On my MOT I got a advisory that my front void bushes are split, but they didn't fail becuase there was no excess movement. A new pair are £35ea from my supplier.

    How much labour involved?

    With my engine clocking 121k+ miles, theres a heafty amount of vibrations, so I'll be looking to get my Vibration Dampers renewed and hopfully my local garage will agree, however, what's the reasoning behind these dampers being 1 of them £70 and the other £135 each. (also how many will be needed?) Belt Tensioner | Drive Belt Idlers | Timing Belt Damper

    Again as above massive vibrations in this area with the Haldex "Doughnut" damper, I'll be replacing this when I can. http://www.audi-sport.net/vb/new-a3...d-vibrating-2-thousands-revs.html#post1031695





    Question.. what else should I be looking at to replace? (I'm actually thinking that my cylinder head is going, coolant is boiling off pretty quick (i get the warning on at least once every 6 weeks!) and its sounding like a tractor.
    #1
  2. Ads

    Ads

    [Sep 19, 2014]

Share This Page