1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Central locking pump question

Discussion in 'A4/S4 forum(B5 Chassis)' started by bhainart, Mar 18, 2010.

  1. bhainart

    bhainart New Member

    Joined:
    Mar 16, 2010
    Messages:
    25
    Likes Received:
    0
    Does anyone know how to re-assemble the graphite discs (in what order and position relative to the three screw holes) as when I took my unit to bits there was only one disc left intact which was the one next to the motor base itself. I have seen the kits on eBay to replace the graphite discs but still not clear from the pisctures how they go back together. Do all the notches line up?

    Thanks in advance
     
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. olds_kool

    olds_kool Active Member
    VCDS Map User

    Joined:
    Jul 21, 2007
    Messages:
    1,076
    Likes Received:
    8
    just replied via ebay but no the original notches dont line up middle one is off
    but the kits i sell do line up and there marked for alignment just to be sure
    kev
     
  4. bhainart

    bhainart New Member

    Joined:
    Mar 16, 2010
    Messages:
    25
    Likes Received:
    0
    Thanks again Kev. Will be in touch shortly as just spent over £550 on new ABS module/disc/pads last week to get the quattro through it's MOT. Got home from the first trip out and the central locking stopped working!!!
    They say these things come in threes...LOL!
     

Share This Page