1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Cam Belt Snapped on 2002 S3

MarcS3 Jul 15, 2013

  1. MarcS3

    MarcS3 New Member

    21
    1
    1
    Hi all,
    im new to the site but have always read your lots post and found them very helpful.
    im in a pickle my cam belt has gone, had the head of and it's bent the exhaust valves as per, the pistons are only just marked.
    what are my chances of just the head work or am I lookin at more.

    please hellllp
     
  2. The Doctor

    The Doctor Well-Known Member

    1,394
    189
    63
    Hi mate, I suggest you post this in the S3 8L forum section - you'll definitely get some good advice in there. Good luck with it.

    Where abouts are you?
     
  3. MarcS3

    MarcS3 New Member

    21
    1
    1
    Sorry new to posting, norfolk
     
  4. SPARTAN91

    SPARTAN91 RED FIVE STANDING BY Regional Rep Team Silver Audi A3 TDi

    484
    165
    43
    Welcome to the forum sorry to here about your cam belt hope you get it sorted soon.
     
  5. Sandra

    Sandra Administrator Staff Member Administrator TeamMisano TFSI Owners Group Audi S3 quattro s tronic Platinum Supporter Audi Main Dealer

    26,979
    9,957
    113
    Welcome to audi-sport.net Marc. You will get more help here in the 8l section. Enjoy the forum. :) x
     
  6. @udi A3

    @udi A3 Site Sponsor Site Sponsor VCDS Map User

    1,820
    197
    63
    Well mine went 2 weeks ago and so far the engine and turbo have been replaced, lets hope just the head work is needed in your case ! put it together and turn it over by hand first of course. not sure how easy the rods bend on a petrol a3.
     

Share This Page