1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Bumper 'Blanks' Fitting Help

Discussion in 'A3/S3/Sportback (8P Chassis)' started by _GRP_, May 29, 2011.

  1. _GRP_

    _GRP_ A3 2.0TDI Sportback S-Line

    Joined:
    Feb 9, 2010
    Messages:
    250
    Likes Received:
    8
    Hi Guys.

    Not sure what the technical term is, but I'm got a 2nd hand S3 bumper, that had the 'blanks' missing. The image below should help.... Think they are required if you don't have headlight washers like me.
    [​IMG]


    So, I've got the replacement 'blanks' from Audi, and they fit nice but I've now idea how they secure in, as at the moment they can pop back out.

    Any ideas/help?
    George
     
    #1 _GRP_, May 29, 2011
    Last edited: May 29, 2011
  2. Google AdSense Guest Advertisement



    to hide this advert.
  3. Lings

    Lings Active Member

    Joined:
    Jun 6, 2010
    Messages:
    2,070
    Likes Received:
    30
    If there not going to be used i would glue them in George
     
  4. _GRP_

    _GRP_ A3 2.0TDI Sportback S-Line

    Joined:
    Feb 9, 2010
    Messages:
    250
    Likes Received:
    8
    yep, that's what I thought
     
  5. FranA3

    FranA3 events moderator
    Regional Rep

    Joined:
    Dec 4, 2008
    Messages:
    7,147
    Likes Received:
    250
    yeah i agree glue them in
     
  6. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor Gold Supporter VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    28,036
    Likes Received:
    1,393
    If not fitting xenons then sikaflex & fill/sand & paint.
     
  7. _GRP_

    _GRP_ A3 2.0TDI Sportback S-Line

    Joined:
    Feb 9, 2010
    Messages:
    250
    Likes Received:
    8
    Thanks for your help guys.
     

Share This Page