1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Boost question to chipped s3's

s3withproblems Aug 11, 2005

  1. s3withproblems

    s3withproblems New Member

    21
    0
    1
    To chipped s3 owners, I assume you have around 250 bhp, What boost do you have, constant and peak ?
     
  2. h3msy

    h3msy Member

    70
    0
    6
    mine peaks at 1.6bar
     
  3. s3withproblems

    s3withproblems New Member

    21
    0
    1
    I get 1.4bar when I hit the gas pedal strongly at the first time , but it than sits to 1.1 bar and it stays there until 6000rpm. What constant boosts do you have ?
     
  4. jojo

    jojo Looking for Boost! Staff Member Moderator Team Daytona quattro Audi S3 Audi A6 Audi Avant Owner Group

    28,768
    3,436
    113
    Peaks at around 1.4/5bar during the midrange, then settles to 1-1.1bar at top end on my car.
     
  5. imported_plexxi

    imported_plexxi Guest

    0
    0
    0
    I have a MTM chip and mine also peaks at 1,5 when you hit the accelerator and then settles at 1,4 bars during the midrange revs.
     
  6. Ryanc

    Ryanc Active Member

    1,321
    0
    36
    When it was chipped it was 1.1 peak 1 held.
     
  7. h3msy

    h3msy Member

    70
    0
    6
    mine settles around 1.1
     
  8. ELIASGK74

    ELIASGK74 Member

    47
    0
    6
    1,75 overboost from low revs,
    1,2 until 6200
    1,1 later
    with ttda,full exhaust 70mm with one free cat,free afm,samco tip
     
  9. Ess_Three

    Ess_Three Active Member

    5,383
    12
    38
    A bit more than a simple re-map...but mine was running:
    1.85-1.89 peak.
    Holding 1.3 to 6800RPM.

    Torque at 330lb-ft and power at 275 ish.
     

Share This Page