Separate names with a comma.
Discussion in 'A3/S3 Forum (8L Chassis)' started by Daniel Vzla, Apr 14, 2007.
does anyone if this fitting will work in an A3?
its a mk4 golf that one isn't it?
Yes, but i don't know if the steering wheel pillar is the same than my face lifted A3? as i don't want to modify the A pillar since i can't find the OEM fabric to cover it all again
find one in a breakers like prawn did and cut the rooflinig out thats what i'm planing for my S3!:icon_thumright:
That's what i had planed before, but is almost impossible find here one a3/s3 in the breakers, actually is really hard to find audi's don't ask me why hehe at least i haven't found any beaker that has european spares, the most commercialized cars here are jdm but i've found these, i think they are a little bit pricey but they do the work and you don't have to modify anything,
You do if you have an s3 with the dark grey pillars!
didn't know that S3s have the pillars in dark grey, mine is an a3 and has lisght gray pillars
They dont do rhd for us brits either!
it's an us site but i saw rhd single gauge pillars
You have a link, I cannot see them!
They are available in black too!
this is the picture
and the page is http://www.20squared.com/catalog/index.php?cPath=6_9_29_46_77, i think i'll go for the 2 gauges pod, for bost and air/fuel and let you know the quality of it:weight_lift2:
It says they wont fit any audi..? Only mk4 golf and passat.
as long as i know pillars from gti's are the same as audi's, but i think i'll double check
Check the FAQs, they say not!
shame, id love one of them for the s3.
the chrome, black , carbon ones look like cheap scooby tat
the golf pillars are definately different if my memory serves me correctly! as i also looked into getting a 42draft pod, but realised it just wasnt going to fit......
be a man, make your own like i did!
I cannot make my mind up about your brilliant and excellent effort!
Whether its OEM or a bit like a big toe poking out of an old sock, i am in two minds still! lol! lol
I am wondering about getting a GB interest on a housing and boost guage with grey dial to match the originals incl LEDs and S3 logo!
I think a generic gauge with some dials made up at a local place i know (that develops dashboards for cars!) may be the way to go!
why not buy a generic pod off ebay for an A3 and cover it in matching material. think thats what i will do.
is that what you did prawn
anyone know where you can buy the material from?
i know what you mean about a big toe, do they not do smaller LCD type gauges?
I'm thinking seriously about modifying the oem pillar but can't find one in the breakers, neither the simylar material to start modifying the original one :S i'm thinking in the automete sprt comp II series boost and air/fuel gauges
has anyone found any fabric to match the S3?
also im looking at the autometer gauges but dont know what rating to get? im guessing the 30psi ones are the ones to go for?
i found now one from blitz that will be stuck on the windshield, looking forward to test it and let you know
Ahh sound mate, some pix would be good too. ! looking forward to it