1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

BCS Turbo Back exhaust fitted

Discussion in 'A3/S3/Sportback (8P Chassis)' started by jonny1985, Nov 9, 2013.

  1. jonny1985

    jonny1985 Member

    Joined:
    Jul 16, 2011
    Messages:
    219
    Likes Received:
    15
    Well i drove the 2.5 hours down to BCS Automotive to have a full TBE exhaust fitted by these guys. I opted for the non power valve system with a 200 cell sports cat . Upon arrival i was greeted by Dave and was showed to the waiting area where nigel was.
    After a few cups of tea in a quite chilly waiting area the exhaust was done.
    Dave said its probably one of the cleanest S3s he has ever seen and was very impressed with it under neath. Was happy about that lol
    Dave was telling me about the amount of work that goes into this exhaust as its one of the very few FULL 3" turbo back exhauts. The workmanship that has gone into this exhaust is second to none. A genuine 100% stainless steel exhaust, All flanges are Stainless steel. Lambda bosses are Stainless steel. Inside of the exhaust is Stainless steel
    The tailpipes i went for are more or less what you get on the mk5 GTI. Im not a fan of the Jet cut on the special tips you get on other exhausts. These tips have just the right amount of poke out of the rear valance when hot. but when they are cold they are nicely tucked away. Right tip is slighty longer than the left as to follow the line of the rear valance.
    Let the pictures do some talkin
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    After the exhaust was fitted i was showed underneath the car and told about the exhaust. They also fitted a new poly bush gear box bush .
    They also asked what was happening with my old exhaust. I said i was keeping it. Then i went off to pay. When i returned they had dropped my rear seats moved my suitcase and turned the inside of my car into a bubble wrap cave. The exhaust was wrapped in endless layers of bubble wrap and carefully placed in my car. THATS CUSTOMER SERVICE FOR YA.
    All comments are welcome thanks
     
  2. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,987
    Likes Received:
    1,381
    That's impressive, I only suggest companies I know are quality at what they do, I've seen nothing but good work so far, well done to these guys.

    As I said before, its a Nigel thing & yes I can lick them, but don't get time to do unfortunately lol.

    Serious note though, when I get a new car I think I may give them a call, workmanship looks very good.
     
    #2 NHN, Nov 9, 2013
    Last edited: Nov 9, 2013
  3. jonny1985

    jonny1985 Member

    Joined:
    Jul 16, 2011
    Messages:
    219
    Likes Received:
    15
    lol NIGEL

    Workmanship is unreal the time and effort that goes into them making the exhaust just right Is great
     
  4. Marshy

    Marshy Settled in

    Joined:
    Nov 7, 2013
    Messages:
    1,245
    Likes Received:
    400
    Bcs are the only people to deal with when it comes to exhausts.
    Fantastic products with quality to match, they sound amazing and the really good points are they stay looking good years down the line which shows how good they are.

    Owned by a pair of true enthusiasts who go the extra mile and further.

    I've had bcs systems on my last 2 cars and when the time comes to mod my S3 there's nobody else I'd trust.

    Glad more and more people are finding exhaust perfection.
     
    Dean_T likes this.
  5. Mr. B

    Mr. B English...not so good

    Joined:
    Jan 23, 2012
    Messages:
    1,076
    Likes Received:
    177
    Nice, any pictures of it on the ground?
     
  6. S3_Jacko

    S3_Jacko Well-Known Member

    Joined:
    Jul 16, 2010
    Messages:
    1,616
    Likes Received:
    456
    Myself and turbonutz recently fitted the bcs to his car... moderate difficulty diy job.... we had it done in 2hrs... very nice throaty note from it... and as above, the quality looked very good..!
     
  7. Brodster

    Brodster Shark Performance in Scotland
    Regional Rep VCDS Map User

    Joined:
    Mar 17, 2011
    Messages:
    3,511
    Likes Received:
    848
    I thought his was a Milltek mate.
     
  8. S3_Jacko

    S3_Jacko Well-Known Member

    Joined:
    Jul 16, 2010
    Messages:
    1,616
    Likes Received:
    456

    He had the Milltek back box Mark... We fitted the full BCS system onto his a few weeks ago... sounds nice
     
  9. downtothebone

    downtothebone Active Member

    Joined:
    Mar 2, 2012
    Messages:
    308
    Likes Received:
    37
    I have the BCS downpipe and sports cat on my cabrio ...
     
  10. smurfworth

    smurfworth Well-Known Member

    Joined:
    Feb 6, 2011
    Messages:
    1,628
    Likes Received:
    400
    Looks clean! The size of that 3" :hubbahubba:

    What would happen if you had no centre silencers and their power valve fitted? Bet that would sound lush
     
  11. Keane

    Keane Active Member

    Joined:
    Jul 10, 2013
    Messages:
    428
    Likes Received:
    58
    What sort of price we looking at fitted for this exhaust ?
     
  12. JJ.Foulds

    JJ.Foulds Well-Known Member

    Joined:
    Feb 23, 2013
    Messages:
    1,195
    Likes Received:
    170
    yes this ^... and where are they based?
     
  13. Dave-S3

    Dave-S3 Active Member

    Joined:
    Jun 13, 2012
    Messages:
    648
    Likes Received:
    124
    £1100 fitted ish, based in Merseyside.
     
  14. N8

    N8 Kowalski Details
    VCDS Map User

    Joined:
    Jul 4, 2007
    Messages:
    17,166
    Likes Received:
    696
    They are based in St. Helen's of the East Lancs road, I am visting them in a few months with me ED30!
     
    Dave-S3 likes this.
  15. Davjon747

    Davjon747 2011 S3 8p sportback sprint blue

    Joined:
    Mar 18, 2013
    Messages:
    231
    Likes Received:
    25
    I have the non power vavle being built for me now can't wait for it to arrive purple of questions for you if I may, is it as loud as non res miltek ( or louder) what's it like noise wise on a cold start. And what's like compared to oem when just driving normal of boost and motor way speed say 80mph.

    Regards Dave
     
  16. S.

    S. Well-Known Member

    Joined:
    Mar 5, 2009
    Messages:
    1,549
    Likes Received:
    272
    Do they sell cat back power valve?
     
  17. Davjon747

    Davjon747 2011 S3 8p sportback sprint blue

    Joined:
    Mar 18, 2013
    Messages:
    231
    Likes Received:
    25
    I'm not sure don't think so best bet is give them a call very helpful guys
     
  18. BCS Nige

    BCS Nige Member

    Joined:
    Oct 5, 2012
    Messages:
    47
    Likes Received:
    32
    Hey guys
    Powervalve is only available as a full TBE
    Cheers
    Nige
     
  19. Davjon747

    Davjon747 2011 S3 8p sportback sprint blue

    Joined:
    Mar 18, 2013
    Messages:
    231
    Likes Received:
    25
    There you go what prompt reply.
     
  20. Davjon747

    Davjon747 2011 S3 8p sportback sprint blue

    Joined:
    Mar 18, 2013
    Messages:
    231
    Likes Received:
    25
    Nige I can't wait for mine to be built hope your be starting it soon, can't wait for that nice big box to be delivered.
     
  21. Davjon747

    Davjon747 2011 S3 8p sportback sprint blue

    Joined:
    Mar 18, 2013
    Messages:
    231
    Likes Received:
    25
    How does it feel with new gear box bush ?
     
  22. RustyBucket

    RustyBucket Active Member

    Joined:
    Mar 24, 2014
    Messages:
    250
    Likes Received:
    49
    These guys are superb with what they do. I had the powervalve fitted a couple of weeks ago and absolutely love it. Should also give a shout out to Paul who makes and fits the exhausts and also does a great line in bubble wrapping old exhausts ;--)
     
  23. Davjon747

    Davjon747 2011 S3 8p sportback sprint blue

    Joined:
    Mar 18, 2013
    Messages:
    231
    Likes Received:
    25
    Did you have the powerflex mount done aswell with the exhaust
     
  24. RustyBucket

    RustyBucket Active Member

    Joined:
    Mar 24, 2014
    Messages:
    250
    Likes Received:
    49
    Hummm, not sure.......they may have done that too.
     

Share This Page