1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B6 s line splitter mesh

Superdexta May 3, 2011

  1. Superdexta

    Superdexta New Member

    5
    0
    1
    Hi folks. Can't seem to find anything anyplace where I can pick up the 3 bits of mesh that fit into the genuine s line splitter at the front of the b6. I made bits of my old one in the winter snow and all I can pick up is a genuine 2nd hand splitter without the 3 mesh pieces. Scrapyards/eBay and all I can get is some outfit offering genuine mesh but at 140 pounds!!!!

    splitter only cost 80! Any links or advice appreciated as I'm getting desperate. Don't want to start muckin about with cheap mesh improv.

    Thanks
     
  2. hades-

    hades- Well-Known Member VCDS Map User

    9,481
    646
    113
    ebay or dealer
     
  3. swarcup

    swarcup Well-Known Member

    1,326
    40
    48
    thats the price roughly, the centre one is around £80 and the two sides are around £16 each. just got all mine from the dealer
     
  4. Superdexta

    Superdexta New Member

    5
    0
    1
    Cheers lads. Thought it was steep. No prob. My s line upper bumper is cracked also. Just finding out the standard bumper is not compatible without modifying. Is this true. Can't find s line bumper anywhere.
     
  5. swarcup

    swarcup Well-Known Member

    1,326
    40
    48
    yes you have to mod it to fit. i did mine and to be honest it wasnt that hard. took about 4 hours start to finish. the bumpers are quite sought after so are hard to track down. saying that ive just seen one for sale in the classified section £150 take a look
     
    Last edited: May 3, 2011

Share This Page