1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B5 RS4 measuring blocks help VAG COM

Discussion in 'VCDS (formerly VAG-COM) forum' started by rs4driver, Jan 15, 2007.

  1. rs4driver
    Offline

    rs4driver New Member

    Joined:
    Jan 15, 2007
    Messages:
    3
    Likes Received:
    0
    [Jan 15, 2007]
    Hi all im new to this forum, ive purchased a b5 rs4 but im not very happy with the mpg the car is returning, im getting 12-13mpg driving locally driving it normally, ok i know (when 1 buys one of these one shouldnt worrie about fuel) but cummon 12 mpg its a bit steep my 911 turbo 91 returned more than this. so if theres any body out there can can advice me pls help this car has had a MAF sensor about 1-1/2 years ago and there s nothing showing on vag com as faulty any help appreciated im sure these cars should return 18-22mpg locally.or any body can help me with vag com measuring blocks i.e testing sensors etc values on MAF sensor.

    thanks
    #1
  2. Ads

    Ads

    [Sep 18, 2014]

  3. vw754
    Online

    vw754 vorsprung Durch Technik

    Joined:
    Nov 4, 2006
    Messages:
    2,017
    Likes Received:
    28
    [Jan 15, 2007]
    maf dont always show on vag-com
    #2
  4. rs4driver
    Offline

    rs4driver New Member

    Joined:
    Jan 15, 2007
    Messages:
    3
    Likes Received:
    0
    [Jan 15, 2007]
    can you tell me then what measuring group its in then and what the values should be?
    #3
  5. Sebastian
    Offline

    Sebastian Member

    Joined:
    Aug 7, 2006
    Messages:
    286
    Likes Received:
    0
    [Jan 15, 2007]
    That would be news to me. If the ECU supports showing a MAF value, the VC will show the value too.

    This should help regarding the "where"...

    http://www.ross-tech.com/vag-com/m_blocks/

    ...and a 2.7T should give you at least 180 g/s.
    #4

Share This Page