1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

B5 Rs4 brakes under b6 s4 alloys on a b5 s4 anyone??

Discussion in 'A4/S4 forum(B5 Chassis)' started by aidank1981, Nov 2, 2010.

  1. aidank1981
    Offline

    aidank1981 Member

    Joined:
    Nov 21, 2006
    Messages:
    252
    Likes Received:
    0
    Been searching threads but this gets a bit specific! I have an rs4 b5 front brake set up BUT am unsure about clearances under a set of 18" s4 b6 avus 6 spoke's on my b5 s4, there ET45's and are pretty close to even the standard callipers!
    Anyone running this? Can confirm if spacers are required and if so what size?
    Cheers
    #1
  2. jcb
    Offline

    jcb Active Member

    Joined:
    Sep 19, 2005
    Messages:
    4,118
    Likes Received:
    13
    10mm spacers as a minimum. there is a guy on 246 that has them on his RS4 shod B5 S4, I believe he said you can just slide a rizla paper between them!
    just missed out on a set of 18" avus wheels on eBay
    #2
  3. aragorn
    Online

    aragorn "Stick a V8 in it!" Staff Member Moderator

    Joined:
    Jan 30, 2008
    Messages:
    15,530
    Likes Received:
    301
    The B5 RS4 calipers are quite a bit lower profile than the S4 ones, i'd recon they should go without too much of a problem.
    #3

Share This Page