1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Avant Miltek cat back system twin exit with all parts to fit.

Discussion in 'Audi S4/A4/A4 Cab (B7 Chassis)' started by Audi-do-dat, Mar 31, 2009.

  1. Audi-do-dat
    Offline

    Audi-do-dat New Member

    Joined:
    Mar 22, 2008
    Messages:
    29
    Likes Received:
    0
    Hi,

    I recently puchased Nobbers Milltek cat back stainless steel twin exit resonated exhaust system, with all parts required to convert a single exit avant to twin exit.

    Includes System itself, heatshield for right hand side of car, exhaust hanger for right hand side and rear twin exit valance in Silver (easy to spray though). I paid £350 for this lot, which was a bargain, and i'd like to get that back. I don't really want to put this on Ebay as I think it'd sell for more than £350 and I'm not into profiteering at another members expense.

    Was going to link to Nobbers old thread for the pic's but unfortunately he's deleted it.

    Basically, I've had a change of heart, sold my avant and bought a MK V golf GTI- which it obviously won't fit !!

    I'm located in Bristol 5 mins from the M4/M5 interchange.

    Many thanks, bargain here for someone.
    #1
  2. Marc1
    Offline

    Marc1 Member

    Joined:
    Feb 25, 2008
    Messages:
    726
    Likes Received:
    1
    #2
  3. Audi-do-dat
    Offline

    Audi-do-dat New Member

    Joined:
    Mar 22, 2008
    Messages:
    29
    Likes Received:
    0
    I'll give this a few more days but then it'll have to go on Ebay.
    #3
  4. Audi-do-dat
    Offline

    Audi-do-dat New Member

    Joined:
    Mar 22, 2008
    Messages:
    29
    Likes Received:
    0
    Right, I've been really lazy with this but having now bought a GTI Edition 30 I know I'm not going to be using it myself.

    £300 collected, will leave it here for 1 week but will then stick on Ebay. Not listed anywhere else.
    #4
  5. BILKO1
    Offline

    BILKO1 Member

    Joined:
    Sep 1, 2003
    Messages:
    301
    Likes Received:
    1
    Would this fit my B6 130 quattro tdi advant with a few mods?
    #5
  6. quattrojames
    Online

    quattrojames Moderator Staff Member Moderator

    Joined:
    Mar 28, 2008
    Messages:
    13,888
    Likes Received:
    475
    It won't fit a quattro sadly mate :sadlike:
    #6
  7. M7R
    Offline

    M7R Type Approval Engineer,

    Joined:
    Sep 9, 2008
    Messages:
    212
    Likes Received:
    1
    is this for b6 or b7? if its a b7 tdi pm me some pics over etc :yes:
    #7
  8. Marc1
    Offline

    Marc1 Member

    Joined:
    Feb 25, 2008
    Messages:
    726
    Likes Received:
    1
    B6 and B7 are the same (at least in terms of fit). Plus Nobbers Avant was a 2.0TDI 140 Avant (B7), so you're good to go M7R :arco:
    #8
  9. Audi-do-dat
    Offline

    Audi-do-dat New Member

    Joined:
    Mar 22, 2008
    Messages:
    29
    Likes Received:
    0
    Hi, haven't got any pic's and can't take any at the moment as it's pouring down here. Might be able to take some tomorrow, but it came off Nobers B7 tdi and all the bits are included that were used on his car.
    #9
  10. M7R
    Offline

    M7R Type Approval Engineer,

    Joined:
    Sep 9, 2008
    Messages:
    212
    Likes Received:
    1
    I have PMd you about this, i call first dibs :thumbsup:
    #10
  11. RosMc
    Offline

    RosMc Member

    Joined:
    Sep 3, 2006
    Messages:
    71
    Likes Received:
    0
    Is this the loud version, or the slightly quiter (more like stock) sounding version?

    Im very interested.
    #11
  12. M7R
    Offline

    M7R Type Approval Engineer,

    Joined:
    Sep 9, 2008
    Messages:
    212
    Likes Received:
    1
    This is now nestling very nicely on my b7:rock: Ill get pics up laters when it finished...

    Cheers Martin, and thanks to your good wife for the coffe this morning to wake me up :blush:
    #12

Share This Page