1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Audi TT Enhancement Detail

Discussion in 'Detailing' started by butler2.8i, Sep 11, 2012.

  1. butler2.8i
    Offline

    butler2.8i Member

    Joined:
    Jun 27, 2009
    Messages:
    184
    Likes Received:
    23
    [Sep 11, 2012]
    Audi TT Enhancement Detail

    Products and equipment used

    Uber microfiber towels
    Chemical guy’s woolly mammoth drying towel
    3m yellow pads 150mm 75 mm
    3m black pads 150mm 75mm
    Halogen site lights
    Makita rotary polisher
    DA Polisher
    Carpro Fixer Polish
    Carpro eraser
    Britemax Blackmax
    3m masking tape
    Meguiars APC
    Costco microfibre towels
    Meguiars hyper dressing
    Valet pro citrus bling
    Bilt Hamber AutoWheels
    Valet Pro PH neutral Snowfoam
    Valet pro tyre dressing
    AMDetails AMbubbles
    AMDetails AM Wax
    Bilt Hamber clay bar
    Autosmart Tardis
    Various brushes
    Kranzle pressure washer
    Carpro Sheepskin wash mitt
    Carpro Perl
    Noodle wash mitt
    Carpro Lambs wool wash mitt
    Poorboys microfibre clothes
    Uber buffing clothes
    Autobrite Snow foam gun
    Chemical guys Jetseal 109
    Autobrite Repel
    Auto Finesse Mecury Metal Polish
    00 grade wire wool



    Car wash snowfoamed and washed outside, before bringing inside for claying and then rinsed before being brought inside for drying

    [​IMG]

    [​IMG]

    Some before photos

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]





    Car was taped up ready for polishing with Carpro fixer polish on a yellow 3m pads the panels wiped down with Carpro Eraser and followed up with Britemax blackmax on black 3m pads.

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    Exhaust was cleaned up using Auto Finesse metal polish and 00 grade wire wool

    [​IMG]

    [​IMG]

    #1
  2. Ads

    Ads

    [Nov 27, 2014]

  3. butler2.8i
    Offline

    butler2.8i Member

    Joined:
    Jun 27, 2009
    Messages:
    184
    Likes Received:
    23
    [Sep 11, 2012]
    Wax was AMDetals AM Wax first coat applied by hand leaving it for around 30min before buffing with Uber buffing towels, a second coat as applied and the process repeated.
    The plastic trim was dressed using Carpro Perl which is a cracking product which a little goes a long way and gives a stunning finish.
    After this I cleaned the glass and gave them all 2 coats of Autobrite repel and also gave the arches coat of hyper dressing and dressed the tyres using the Valet pro tyre dressing. Alloys sealed using 2 coats of Chemical guys Jetseal 109

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]

    A couple of beading shot`s

    [​IMG]

    [​IMG]
    #2

Share This Page