1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Audi S3 2009 spacing....

AntonTDI Feb 7, 2013

  1. AntonTDI

    AntonTDI Member

    44
    0
    6
    Hi guys,

    will the offset of these be ok on a S3

    HANDR Hubcentric 12mm spacers 112x5

    its all standard atm but coilovers are on route :)
     
  2. Reload

    Reload Bird is the Word!

    367
    49
    28
    12mm are fine on the back, should be okay on the front.

    Once lowered you may have to remove the proud screw / bolt head in the rear wheel arches to prevent rubbing
     
  3. leeds2592

    leeds2592 When I grow up, I want a 964!

    1,399
    222
    63
    As above mate.

    Most people stick 12mm on the back and 10mm on the front.
     
  4. AntonTDI

    AntonTDI Member

    44
    0
    6
    thanks mate ordered :)
     
  5. poli84

    poli84 Member

    425
    57
    18
    I've got 12mm on back and 10mm on front, relatively low on PSS10 coilovers.
    Arch screw removed, I still get rubbing in the back if rear passengers are on board.

    If I had my time again, I'd prob do 10 and 10.

    Oh, and make sure you buy longer bolts. These are a must if you are going 10 and 12.
     

Share This Page