1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Audi Rear Wiper Arm

Discussion in 'A4/S4 forum(B5 Chassis)' started by tonybolony, Sep 4, 2013.

  1. tonybolony

    tonybolony Member

    Joined:
    Mar 18, 2010
    Messages:
    130
    Likes Received:
    1
    Would i be correct in thinking the A3 and A4 arm and washer jet cover are the same?

    just fixed my motor and need to replace the arm really as it is a bit tatty
     
  2. Advert Guest Advertisement


  3. jbh

    jbh TDi lover

    Joined:
    Jan 3, 2010
    Messages:
    1,312
    Likes Received:
    142
    my motor works but my washer jet is blocked solid is there a fix for this? ive tried blowing it out with the air compressor but no joy.

    sorry for the thread hijack
     
  4. B5NUT

    B5NUT Well-Known Member
    VCDS Map User

    Joined:
    Feb 6, 2010
    Messages:
    3,212
    Likes Received:
    507
    Looking at etka they are not the same as the A3, the A6 & passat of the same years share the same arm & cover.

    You need to change the jet audi part number is 3B9 955 985 A cost is around £6
     
  5. jbh

    jbh TDi lover

    Joined:
    Jan 3, 2010
    Messages:
    1,312
    Likes Received:
    142
    cheers for that. how easy are they to change? the old one looks well rusted in there.
     
  6. B5NUT

    B5NUT Well-Known Member
    VCDS Map User

    Joined:
    Feb 6, 2010
    Messages:
    3,212
    Likes Received:
    507
    They just pull out, and it looks like this

    mSZkmzND6pXpn6ZW6oCbBuA.jpg

    If you snap the plastic end off you will just have to drill the rest of it out.
     
  7. tonybolony

    tonybolony Member

    Joined:
    Mar 18, 2010
    Messages:
    130
    Likes Received:
    1
    i dont need to replace the jet i was just looking at the arm and cover as they looked the same on ebay when i saw a pic of a A3 for sale and A4 for sale, both looked totally identical, i really only need a cover for the Jet tbh
     
  8. B5NUT

    B5NUT Well-Known Member
    VCDS Map User

    Joined:
    Feb 6, 2010
    Messages:
    3,212
    Likes Received:
    507
    I was talking to JBH about the jet.

    For your wiper arm and cover, it's what I said in my first message the A3 one won't fit.

     
  9. tonybolony

    tonybolony Member

    Joined:
    Mar 18, 2010
    Messages:
    130
    Likes Received:
    1
    ok thankyou
     
  10. jcb

    jcb Active Member
    VCDS Map User

    Joined:
    Sep 19, 2005
    Messages:
    4,133
    Likes Received:
    13
    get the refurb kit for the avant motor
    well worth it
    the jet wont be blocked the pipe will be fritzed
     

Share This Page