1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Audi Footwell/Puddle/Boot and Glove box 501 LED upgrade

Discussion in 'Archive' started by t8ups, Oct 4, 2011.

  1. t8ups

    t8ups Site Sponsor
    Site Sponsor VCDS Map User

    Jun 22, 2011
    Likes Received:
    Here we are proud to introduce the EM Tuning VAG Panel bulb, I thought I would share my storey with you all to see how they were produced

    Having tried several different bulbs out in this unit i found that the light spread of an "off the shelf led" was not as consistent as the stock bulb, so i set out to design a bulb that would fit in the unit where all the bulbs face down and out where they should be. i got my thinking cap on and produced a sketch of what I thought would work, then cut out bits of card and some broken led’s and stuck it altogether and found that I had just designed and made a bulb, Great I thought, but now I had to get the design’s over to the factory to see if they could make the bulb to my spec with the correct canbus specs, at 1[SUP]st[/SUP] I was told a canbus bulb of this type could not be done, I then sent back an email saying do whatever you can to get some canbus into it so no errors come up or that it would work as I have had problems trying to get a bulb to work in the boot of an A3 as I am sure a lot of you have.

    Pictures were sent back and forth and this bulb was formed….

  2. Advert Guest Advertisement

  3. Helifella

    Helifella Co-Driver ~ Hattie
    Moderator Regional Rep VCDS Map User

    Nov 21, 2011
    Likes Received:
    LED porn :hubbahubba: LOL

Share This Page