1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Audi A4 B6 - S Line Conversion - Exterior Only

amz May 5, 2012

  1. amz

    amz Member

    185
    2
    16
    Hello everyone,

    I have a standard Audi A4 SE Model and I initially wanted to put the Votex body kit on it, but since it is so rare to find I am thinking of doing the S Line Body Kit conversion instead.

    Can anyone tell me roughly how much it would cost and what parts I need?

    Thank you in advance

    [​IMG]
     
  2. amz

    amz Member

    185
    2
    16
  3. CMD

    CMD Pointing Forward's!!!!!!!!!

    3,015
    17
    38
    AMZ. Only the first item is the 2nd item is not as it does have the twin cut out the 3rd item are standard door blades/trims the S-line items have more flair .
     
  4. CMD

    CMD Pointing Forward's!!!!!!!!!

    3,015
    17
    38
    ArtBet likes this.
  5. amz

    amz Member

    185
    2
    16
    Thanks for the pointers, will the first one fit directly onto my existing bumper without any problems then?
     
  6. CMD

    CMD Pointing Forward's!!!!!!!!!

    3,015
    17
    38
    Last edited: May 5, 2012
  7. amz

    amz Member

    185
    2
    16
    I might aswell just wait for someone who will be breaking the whole Audi of A4 S line model, and I'll just buy everything at once.

    Unless a Votex Kit comes up :search:
     
  8. amz

    amz Member

    185
    2
    16
    Sorry if this sounds stupid but does the S Line Kit have different side skirts or is it only the door blades?
     
  9. jbcalvin

    jbcalvin Member

    688
    21
    18
    s-line skirts are the same as standard, they are just colour coded....
     
  10. amz

    amz Member

    185
    2
    16
    Thanks for answering that. So really all I would need is Front and Rear Bumpers, Boot Spoiler and Door Blades that are S line? Any idea how much it would cost roughly second hand?
     
  11. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    You'd probably get the lower valances for <£70 from a dealer new and unpainted.

    Not sure on the spoiler.

    Door blades will stand you £100 ish each unless you get a luck find on ebay.
     
  12. amz

    amz Member

    185
    2
    16
    Do you mean to say the lower parts of the front and rear bumpers for £70 each?
     
  13. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    I made a typo, I meant to say <£100 - but yes I understand they're about £70 ish.
     
  14. amz

    amz Member

    185
    2
    16
  15. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
  16. scott b

    scott b Active Member VCDS Map User

    1,254
    3
    36
    also look for later sports parts are these are the same as s line except the rear bumper as the s line has the twin cut outs
     
  17. amz

    amz Member

    185
    2
    16
    Thanks mate, doesn't look like I'll need these any more though :D

     
  18. amz

    amz Member

    185
    2
    16
    Is it possible to change the S Line rear bumper's bottom half to change from a exhaust cut outs to a non exhaust cut outs?
     
  19. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    Yes, just remember saloon and avant aren't compatible.
     
  20. amz

    amz Member

    185
    2
    16
    Any idea how much it might be?
     
  21. quattrojames

    quattrojames Moderator Staff Member Moderator Audi A6 Audi Avant Owner Group

    14,039
    565
    113
    £70-100 off the top of my head.
     
  22. amz

    amz Member

    185
    2
    16
    It just makes me think it is quite expensive to do a conversion because what also adds up to the total cost is spraying the parts! Sad times...:3sadwalk:

    Might just have to stick with changing the alloys and putting spacers on.
     
  23. unitzero

    unitzero Bagged B7 170 TDI Avant Audi A4 Black Edition

    568
    198
    43
    I have an Sline front lower that no longer needed - was going to do the conversion myself but selling the car now
     
  24. B6Steve

    B6Steve Member

    42
    0
    6
  25. Paul @ Unit 9 Remaps

    Paul @ Unit 9 Remaps Site Sponsor Site Sponsor

    2,035
    130
    63
    wondered this too
     
  26. amz

    amz Member

    185
    2
    16
    Hello mate, can you pm me the details etc?
     
  27. StuG808

    StuG808 1.9tdi130 Avant FailWheelDrive

    255
    9
    18
    Check the feedback, one person didn't rate those door blades due to poor fit and quality, but others were happy with them. It's odd, to me at least, that there aren't more people, especially in the UK, making reproduction body parts for these cars. Just that with other car makes (mainly Japanese) there are dozens of places where you can get reproduction body parts.
     
  28. Paul @ Unit 9 Remaps

    Paul @ Unit 9 Remaps Site Sponsor Site Sponsor

    2,035
    130
    63
    everyone is going to slate in this and every thread about them been fibre glass and fitment, which this is wrong, same situation when i bought my leon cupra r bumper, was an excellent fit
     
  29. StuG808

    StuG808 1.9tdi130 Avant FailWheelDrive

    255
    9
    18
    Fibreglass wouldn't put me off from buying them, but would be interested to hear the experiences of anyone that has bought the ebay door blades and spoilers. It's often the case that fibreglass repros don't always have a consisten quality of production, I've seen folk getting a group buy of parts from one maker, most of whom are very happy but one or two people seem to get warped parts.
     
  30. PhilW

    PhilW Member

    182
    5
    18
    Would you sell the grills from it?
     
  31. chrisjmcqueen

    chrisjmcqueen New Member

    14
    1
    1
    What difference do spacers make ? Any pics or links ??
     

Share This Page