1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Audi a3 8p front bumper Spoiler Lip help

Discussion in 'A3/S3/Sportback (8P Chassis)' started by toxicv, Jun 12, 2013.

  1. toxicv

    toxicv New Member

    Joined:
    Feb 3, 2013
    Messages:
    2
    Likes Received:
    0
  2. S3_DVG

    S3_DVG New Member

    Joined:
    May 23, 2013
    Messages:
    2
    Likes Received:
    0
    hi its not actually designed to fit. its the splitter thay fitted to the seat leon cupra r. i just cut about 10mm off each of the up rights in the center and used self tappers to fix it to the bumper
     
  3. TDI140

    TDI140 Well-Known Member

    Joined:
    May 19, 2011
    Messages:
    1,596
    Likes Received:
    164
    Its just a seat leon cupra r mk1 splitter i have one on my car you just buy it from seat about £33, then using self tapper screws you screw it to the bottom of your bumper and thats about it really
     
  4. barnzy

    barnzy Member

    Joined:
    Dec 15, 2010
    Messages:
    97
    Likes Received:
    5
    yeah cupra r splitters fit on almost anything... there was a few fiesta mk5 with them on (then see a few cupra r's WITHOUT them) guessing they didnt pay but who am i to say!

    In regards to your question buy a new one from TPS or look on ebay for a cupra r splitter, make sure its on there tight rivet it on! It will look great too well worth the £35!
     
  5. A3HAZ

    A3HAZ Member

    Joined:
    May 23, 2013
    Messages:
    40
    Likes Received:
    4
    Iv got mine sat here waiting to be put on :) let us know how it goes or get some pictures up...if your looking to buy one go straight to Seat there cheaper
     
  6. toxicv

    toxicv New Member

    Joined:
    Feb 3, 2013
    Messages:
    2
    Likes Received:
    0
    heh I already have this home for few days. But wasnt sure if this will fit. But look good on your car TDI 140. So maybe I will try it this weekend. Thanks for info guys
     
  7. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat
    Site Sponsor VCDS Map User

    Joined:
    Jan 14, 2008
    Messages:
    27,985
    Likes Received:
    1,381
    I think they detract from the good lines of the front end tbh, they look bolted on as such, not part of the car, which bodykits etc should look like, hence why the S3 kit is still the best looking/fitting kit out there.
     
  8. dogruufuk

    dogruufuk New Member

    Joined:
    Nov 2, 2014
    Messages:
    10
    Likes Received:
    0
  9. Ash187

    Ash187 Audi-Retrofits.co.uk
    Site Sponsor VCDS Map User

    Joined:
    Mar 12, 2009
    Messages:
    7,180
    Likes Received:
    580
    personally i think they are both overpriced for what they are, wouldn't fit either. the cupra splitter looks ok on prefacelift cars, there is a splitter that can be fitted to facelift cars and some had done it on here but that thread is pretty old, a thorough search will probably dig it up
     
  10. Ash187

    Ash187 Audi-Retrofits.co.uk
    Site Sponsor VCDS Map User

    Joined:
    Mar 12, 2009
    Messages:
    7,180
    Likes Received:
    580

Share This Page