1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ASN's Pub

ScottD3 Feb 17, 2011

  1. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    I'm sure one of the guys here used to work for HP many many years ago but I remember who it was. Why were you interested?
     
  2. ScottD3

    ScottD3 I want your faulty electronics Supporter Team V6 quattro Audi A8 Audi S8 Team Akoya saloon TDi

    15,164
    1,123
    113
    I work for Babcock at the moment and due to contracts with in the Navy HP is taking over the IT support and the 8 people with in our office are being TUPE over to HP.
    After some insider information about what the company is like to work for or any thing else that might be usefull.
     
  3. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Much the same here. I'm waiting for my new Poly Bushes to arrive for my subframe.

    Just fixed a BES Error. Fecking Kerberos is a royal PITA. I wouldn't issue my BES Server an authentication ticket because two of the servers on the LAN had a clock skew greater than 5 mins.

    The two servers that were the problem literally have nothing to do with BES.

    We have a BES server, and various others, including the DC. The only ones that should matter are the BES box and the DC.
     
  4. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    Mate I work with Novell Netware servers and they completely throw a barney if they go out of sync, I know how it feels.

    I'm going to buy all my FMIC bits this week then fit it next week ready to head to Bills on the 1st ;)
     
  5. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    I'll try and come up when you're there actually, want to see the motor :)
     
  6. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    Have you seen my progress thread, did a sh!t load of work last night.

    the 1st of July is a Friday, will you still be able to pop up due to work?
     
  7. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Not yet dude, will have a gander when I get 5.
     
  8. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Yeah, feck it, I'll book it off. I'm due some holiday.
     
  9. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    God it's quiet on here today too. I'm trying to kill time.
     
  10. Dane

    Dane Had an 8L S3, a B5 RS4 now I have a B8 S4

    4,086
    182
    63
    I'm here and I dont think i can have that friday off :(
     
  11. Gti Jazz Blue

    Gti Jazz Blue Active Member VCDS Map User

    1,655
    7
    38
    Well for a change I've been fairly busy this morning - had a couple of system down issues. One looks like the IT support that supports the servers may have been fiddling in SQL with our internal SQL user. Took a bit to find that one - sorted now though.

    Surely Welly your server should all be synced to a master clock - I know all mine are here.
     
  12. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    Oh that's a shame mate because I'm going to become the most powerful K04 on Bill's rollers, wouldn't want you to miss that :p
     
  13. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Yes, they should be indeed. NTP should keep the time running on all the machines including the other servers the same as the DC but that clearly isn't the case.

    I didn't set these up so I will have to investigate that.
     
  14. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    LOL, you wind up merchant....
     
  15. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    I'm selling my other XS Power Manifold on ebay currently. Fed up of having them kicking about so time to get rid. Will have to pop up to Bill's and grab it this evening.
     
  16. Gti Jazz Blue

    Gti Jazz Blue Active Member VCDS Map User

    1,655
    7
    38
    "Kill Bill"'s rollers - LOL
     
  17. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    This is similar to Bill when it comes time to pay up.....

    [​IMG]

    OK, not really. I'm telling porkies....
     
  18. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    It's a shame there wasn't a fully complete prototype available 2 weeks ago or I would have bought it off you.
     
  19. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    If only Bill looked like that.
     
  20. Dane

    Dane Had an 8L S3, a B5 RS4 now I have a B8 S4

    4,086
    182
    63
    Gay off! I wasn't even trying! And I've already been knocked off my top spot.
     
  21. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    What g/s did yours put out?
     
  22. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    I would rather you didn't. I shall say no more....

    Yeah. That would be epic. Sadly, he doesn't.
     
  23. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Last edited: Jun 13, 2011
  24. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
  25. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    See edit above.

    Also bear in mind that G/S don't always translate to BHP output. This is something I have learnt....

    Don't get too hung up on the airfow, it's what it does with it that counts.

    Every motor is different.
     
  26. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    Well hopefully with the FMIC and stage 2 map it'll be quite a good figure...... better than last time anyway!!!
     
  27. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    That is the attitude to go with, 100%.

    See the gains, and be happy with the gains.

    Anything else is a bonus.

    Besides, Dane won't care now, he has migrated over to the darker side..... Mwwhahahahaha.
     
  28. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    I have too been tempted by the dark side but have managed to fight it off. It wasn't easy I must say.
     
  29. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Yeah, the dark side keeps pulling on my short and curlies.

    Considering migrating to a TD05H 20G turbo now instead of the PE1820...

    Only thinking at this stage. Still, on the plus side, it will be a direct swap.... Top mount ROCKS!
     
  30. Dane

    Dane Had an 8L S3, a B5 RS4 now I have a B8 S4

    4,086
    182
    63
    It was absolutely chuffing freezing that day, I remember it well, I easily gained 8 g/s so I've got my fingers crossed for you dude, stage 2 mods should really help keep power through the revs.

    Yeah im in big port head, american turbo darkside heaven/at least flapping my way up to, I'd quite like a spot on Bill's top ten though :) :ninja:
     
  31. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    I hope you get there mate, all the hard work will pay off I'm sure. I plan to retain my spot in the top ten, most likely by investing in the inlet manifold I desperately need.
     
  32. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    Bunk off work on the 1st Dane and come watch me bend my rods on the rollers ;)
     
  33. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Can't you be strategically ill that day Dane?
     
  34. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    Tam's coming with me that day too Dane so there might be 2 of us smashing your old K04 record ;)
     
  35. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    I'd rather be smashing some pasties myself.... :think:

    Hers for example:

    [​IMG]

    Now there, my friends, is a pasty I want to cave in big time.
     
  36. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    I'd ruin that!
     
  37. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    Oh mate, what would I not give for one night of consensual sex with her. I mean seriously. Makes me go all funny.
     
  38. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    It doesn't take long for this thread to change direction lol

    1 Night would be good but I'd be happy with 15 minutes ;)
     
  39. Welly

    Welly VX220 SC Driver :)

    10,696
    130
    38
    I wouldn't, I would want to keep going until her eyes became white.
     
  40. Westy

    Westy Well-Known Member

    17,443
    1,105
    113
    That's nasty mate!
     

Share This Page