1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

APY same internals as an AYP?

Dubstep Aug 12, 2012

  1. Dubstep

    Dubstep Member

    54
    1
    6
    Hi, im curious as to weather the Seat AYP engine has the same forged crank and forged mahle pistons that Audi S3 APY engine has?
    Would it just be a straight swap?
     
  2. Andrew@A.L.D

    Andrew@A.L.D May add NOS to 600+bhp S3.

    3,872
    609
    113
    It may have different internals but still the same engine and will swap over

    Even if it has a cast crank it will be still man enough for your power needs
     
  3. badger5

    badger5 www.badger5.co.uk Site Sponsor

    9,369
    1,911
    113
    different compression ratios
    ibiza is 9.5:1 S3 is 9:1
     
  4. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow... Staff Member Moderator Audi S3

    20,847
    3,687
    113
    As Bill said... I have Ibiza pistons in my AMK engine currently but be aware that while the pins are 20mm they are shorter than 210/225 pins...

    <tuffty/>
     
  5. Andrew@A.L.D

    Andrew@A.L.D May add NOS to 600+bhp S3.

    3,872
    609
    113
    I knew they would be some differences is pistons and pins but wasn't sure
     
  6. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow... Staff Member Moderator Audi S3

    20,847
    3,687
    113
    S3 pin on the left, Ibiza on the right...
    [​IMG]

    <tuffty/>
     

Share This Page