1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

anyone out their in the plymouth area that could plug me in and help me with vag com

Discussion in 'A4/A4 cabriolet/S4 forum(B6 chassis)' started by cominatcha, Mar 21, 2012.

  1. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    hello could and would anyone out their in the plymouth area have a genuine vag com to plug in to my car? audi a4 2004 1.8 turbo bex engine. i want someone to help me to remove the rear lamba sensor and to delete the secondary air pump as bearing is very noisy. any help would be kind cheers guys drop me a line . thanks for your time neil. any advise would be great.:thumbsup: thanks.
    #1
  2. Sandra
    Online

    Sandra MODERATOR Staff Member Moderator

    Joined:
    Sep 12, 2010
    Messages:
    15,876
    Likes Received:
    2,267
    You could also look over on the vcds section. There is a vcds user map in there, have a look and see if there is someone near you and pm them. :)
    #2
  3. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep

    Joined:
    Jul 8, 2008
    Messages:
    8,703
    Likes Received:
    489
    i recon theres a few on here that would love to plug you :undwech:

    remove the rear lamba as in remove it or write it out ?
    as you cant write it out with vcds
    #3
  4. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    thanks princess sandra , will look on that section.:thumbsup:
    #4
  5. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    bez, thanks for the reply, i want to remove the lamba from switching to the front lamba as i have engine management light on. had a new cat and two genuine sensors and that light keeps coming back. any ideas. in to deep at the mo. local garage not trusted at the mo. thanks for your reply. neil.:beerchug:
    #5
  6. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    bez silly me i want to write it out.
    #6
  7. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep

    Joined:
    Jul 8, 2008
    Messages:
    8,703
    Likes Received:
    489
    well i was gona ask if you have a the codes but u need someone with vcds so u wont have
    the light may be a diffrent fault with no codes its gona be hard to advise im sure theres a few lads down that way with vcds tho
    #7
  8. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep

    Joined:
    Jul 8, 2008
    Messages:
    8,703
    Likes Received:
    489
    you need a remapped to write it out vcds cant do it
    #8
  9. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    dreaded po420 code really bad code dude. no one wants this one.... i have a code reader but not vag com. was thinking of buying a chinese flee bay one. what do you think whats yore opinion?
    #9
  10. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    who would you recommend to remap and write out?
    #10
  11. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    poor spelling YORE your.
    #11
  12. Sandra
    Online

    Sandra MODERATOR Staff Member Moderator

    Joined:
    Sep 12, 2010
    Messages:
    15,876
    Likes Received:
    2,267
    #12
  13. cominatcha
    Offline

    cominatcha gonna getcha

    Joined:
    Dec 1, 2006
    Messages:
    78
    Likes Received:
    0
    Thanks sandra have pm. you superstar thanks..:salute:
    #13
  14. bez101
    Offline

    bez101 Yorkshire & Humber Rep. Regional Rep

    Joined:
    Jul 8, 2008
    Messages:
    8,703
    Likes Received:
    489
    its not really a bad code just had it on a gti
    are you sure they were oem lambas ?
    you may have got a dodgey 1
    when you clear the light does it come back on stright away ?
    hows the car running ?
    #14

Share This Page