1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Anyone make their own drop links?

Kaibo Oct 14, 2011

  1. Kaibo

    Kaibo Member

    358
    14
    16
    So my coillies turned up today, happy bunny. Now I want to go as low as the things will allow, decided on drop link change instead of arb, does anyone make any that would be suitable, don't fancy paying £70 off the bay.

    Cheers Kai
     
  2. <tuffty/>

    <tuffty/> Badger 5 Edition...Its all about the flow... Staff Member Moderator Audi S3

    20,341
    3,494
    113
  3. Kaibo

    Kaibo Member

    358
    14
    16
    Thank you, that's a tenner saved
     
  4. s3dave

    s3dave TFSI Hybrid Supporter

    10,110
    736
    38
    I have heard these dont work... and you need the after-market anti- roll bar to eradicate but im not an a3 owner and could be talking ********...
     
  5. 4rings

    4rings Member

    94
    0
    6
    i have these drop links with fk coilovers wound nearly the way down on the front. and a 25mm front eibach anti roll bar. the drop links had to be modified (shortened) as the drivers side rubbed the driveshaft almost constantly. its alot of trial and error to be honest. another problem u may sufer is the driveshaft on the drivers side hitting the chassis leg. mine does rub sometimes but not often enough to start notching the chassis
     
  6. A3Tom

    A3Tom Smell my finger.

    3,504
    14
    36
    Just ditch the standard ARB :)
     

Share This Page