I was just wondering if someone would able to help me with some advise on fitting a set of alloys. I have a 2004 audi a3 2.0 fsi and have purchased a set of 9Jx19h2ET52 alloys with 235/35/19 tyres. i have tried to fit them but they all seem to rub really badly. I assume i will need to space them off but i don't know what size they would need to be. Any advise would be greatly appreciated.
AndyParker
Registered User
Have a look at www.willtheyfit.com
You can plug in your existing alloys size and new alloys size.
It will show you where the differences lie and by how many mm. Should then be able to work out how many mm spacers you may need but bear in mind that will add to any poke.
You can plug in your existing alloys size and new alloys size.
It will show you where the differences lie and by how many mm. Should then be able to work out how many mm spacers you may need but bear in mind that will add to any poke.
