1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

alloy wheels WTF

brownie 25 Jun 2, 2013

  1. brownie 25

    brownie 25 Member

    383
    9
    18
    hi all i picked up a set of rs6 wheels that are marked 5x112 but wont fit.i have rs4's on now which are also marked 5x112 and they do fit. /??????????????????????????????
     
  2. boost-addict

    boost-addict Active Member

    982
    37
    28
    pictures?

    in what way dont they fit?
    bolt holes or the depth of the tyres?
     
  3. WOLF

    WOLF I am WOLF.......

    1,193
    269
    83
    Or is it the centre bore that doesn't fit?
     
  4. SinghB7

    SinghB7 Active Member

    509
    67
    28
    Probly 5x100 reps
     
  5. brownie 25

    brownie 25 Member

    383
    9
    18
    Hello,yes they are reps ,its the bolt holes that don't line up but there clearly marked 5x112 i'm not that bothered tho i only bought them because the were cheap and when i say cheap i mean i got the set with 4 tyres witch are 90% for the price of one tyre so i'm now on the look out for a nice set of 19S
     
  6. boost-addict

    boost-addict Active Member

    982
    37
    28
    i have rs4 reps and they fit mine
    get a picture of the back with a measurement between the bolt holes
     
  7. boost-addict

    boost-addict Active Member

    982
    37
    28
    were you from?
     
  8. brownie 25

    brownie 25 Member

    383
    9
    18
    limerick ireland mate,
    here is a pic, not great but you can make out the 5x112
     

    Attached Files:

  9. boost-addict

    boost-addict Active Member

    982
    37
    28
    ah way to far away,

    i ment a picture of the holes with a ruler or messuring tape if there reps they could have been stamped up wrong, and might be 5 x 108 rather then 5 x 112
     
    Last edited: Jun 6, 2013
  10. brownie 25

    brownie 25 Member

    383
    9
    18
    is it center to center i need to measure
     
  11. boost-addict

    boost-addict Active Member

    982
    37
    28
    no not on a 5 bolt

    you draw an imaginary line round the bolts as a circle. or you can actually do it if it makes it easier. and messure from one bolt directly across the circle to the line as below

    pcd_explained_5_stud_1.jpg
     
  12. boost-addict

    boost-addict Active Member

    982
    37
    28
    make sure you do this as acuratly as possible as 108 and 112 pcd is very close im unsure why vw/audi even bothered with the slightly diffrent sizes
     
  13. gen.heinz guderian

    gen.heinz guderian Well-Known Member VCDS Map User

    1,346
    125
    63
    Are there just 5 bolt holes or more? I had a set of reps which were multifit 5X110 or 5X112
     
  14. brownie 25

    brownie 25 Member

    383
    9
    18
    don't know if you can see this...ahh posted before checking back here so i have measured them wrong,either way they wont fit so at least i have a cheap set of tyres.
     

    Attached Files:

    Last edited: Jun 6, 2013
  15. boost-addict

    boost-addict Active Member

    982
    37
    28
    that dosent help you need to follow what i posted above


     
  16. brownie 25

    brownie 25 Member

    383
    9
    18
    checked again going by the diagram and the are 108,
     

Share This Page