1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Air Con Fault

wallacr May 15, 2008

  1. wallacr

    wallacr Member

    Hi Guys,

    Has anyone else experience any problems with the blowers on their air-con? The temperature part works fine, but the fans/blowers don't on mine. Sometimes they do and sometimes they don't. Also, sometimes if I turn it off and back on a few time they start to work, but not always.

    Vag-com give me the below codes, but after looking it up on the ross-tech site I'm not sure how to tell which part is at fault.

    VCDS Version: Beta 803.4

    Address 08: Auto HVAC
    Control Module Part Number: 8E0 820 043
    Component and/or Version: A4 Klimaautomat 0711
    Software Coding: 00000
    Work Shop Code: WSC 63351
    2 Faults Found:

    01273 - Fresh Air Blower (V2)
    30-10 - Open or Short to Plus - Intermittent
    01273 - Fresh Air Blower (V2)
    29-00 - Short to Ground

    Any advice would be gratefully received :)



Share This Page