WorkInProgress
Registered User
Planning on doing my vacuum hoses at the weekend, bought 3, 4 & 6mm as per tuffty's suggestion on a previous post.
Noticed a slight surge on lift off so assuming leaky hoses?
Is there a write up / guide / walkthrough for doing this on an AGU?
Have searched but can't find anything that helps - pictures would be good
Anything else I should do while I'm at it?
Noticed a slight surge on lift off so assuming leaky hoses?
Is there a write up / guide / walkthrough for doing this on an AGU?
Have searched but can't find anything that helps - pictures would be good
Anything else I should do while I'm at it?