Separate names with a comma.
Discussion in 'A6/S6/Allroad forum (C6 Chassis)' started by spionsrs4, Jul 25, 2013.
Need to get sealing WASHERS for 3.0 tdi injectors but can't find part nr.
This diagram is for the later EU5 V6 fitted 2009 - 2011 Link:- Fuel rail injection unit pressure pipes 2,7/3,0ltr. 3,0l. Fits: 2010 Audi A6 | Jim Ellis Audi Parts
The earlier 2004 - 2009 is near identical diagram ... item 30 on diagram P/N 059 130 519 , approx. Â£3 each @ dealer ...
You can also see it here on the photo of an injector I fitted to mine ...
how to remove injector
Here is my how to guide ... Link:- http://www.audi-sport.net/vb/a6-s6-...njector-removal-installation.html#post1930400
The tools I used were:-
i) Laser 4640 injector puller Link:- Laser Tools | 4640 | Impact Diesel Injector Remover VAG
ii) Laser 4984 difficult access sockets for the fuel pipes Link:- Laser Tools | 4984 | Difficult Access Socket Set 3/8"D
I bought both from ebay Laser 4640 = Â£40 , Laser 4984 = Â£25 , I know of members on another forum just removed injectors by hand/homemade tools ...
I made tool for hitting out injector.
Now i need injector as when was removing small pipe on top of injector i broke this small nipell on side of injector.
Maybe some one selling some injector for 3.0 tdi
and i need done all till tuesday as i'm going on holidays.