1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

a4 cab rear mudflaps

Discussion in 'A4/S/RS Parts' started by Illusion-Paul, Jun 24, 2012.

  1. Illusion-Paul
    Offline

    Illusion-Paul Member

    Joined:
    Jun 12, 2007
    Messages:
    67
    Likes Received:
    0
    I am looking for a set of rear mudflaps, oem audi.

    Been told there is none specified, I fittedsome to the front, but not the rear, can you supply some?
    #1
  2. stoke_audi
    Offline

    stoke_audi Active Member

    Joined:
    Mar 19, 2008
    Messages:
    2,243
    Likes Received:
    18
    Hi Paul

    is it an sline model or not?

    Thanks Dave
    #2
  3. Illusion-Paul
    Offline

    Illusion-Paul Member

    Joined:
    Jun 12, 2007
    Messages:
    67
    Likes Received:
    0
    It is a S-Line, however i believe that the rear bumpers are identical, only the inset piece on the back beside the exhausts are different.

    The ones i originally got, the wholes were too low on the flaps, making the moulded bit position inside the bumper.
    #3
  4. stoke_audi
    Offline

    stoke_audi Active Member

    Joined:
    Mar 19, 2008
    Messages:
    2,243
    Likes Received:
    18
    What year is the cab

    Dave
    #4
  5. Illusion-Paul
    Offline

    Illusion-Paul Member

    Joined:
    Jun 12, 2007
    Messages:
    67
    Likes Received:
    0
    2006, B7 model
    #5
  6. stoke_audi
    Offline

    stoke_audi Active Member

    Joined:
    Mar 19, 2008
    Messages:
    2,243
    Likes Received:
    18
    Hi Paul

    the ones i have found are £28.38 inc vat

    Dave
    #6
  7. Illusion-Paul
    Offline

    Illusion-Paul Member

    Joined:
    Jun 12, 2007
    Messages:
    67
    Likes Received:
    0
    Whats the postage cost?

    Also, the part number i had before was: 8EC075101, what is the one you have?

    Thanks

    Paul
    #7
  8. stoke_audi
    Offline

    stoke_audi Active Member

    Joined:
    Mar 19, 2008
    Messages:
    2,243
    Likes Received:
    18
    Yes

    that the one i have come up with

    Dave
    #8
  9. Illusion-Paul
    Offline

    Illusion-Paul Member

    Joined:
    Jun 12, 2007
    Messages:
    67
    Likes Received:
    0
    They don't fit unfortunately, the holes are not aligned, quite far out.

    Any others which could be available?
    #9
  10. stoke_audi
    Offline

    stoke_audi Active Member

    Joined:
    Mar 19, 2008
    Messages:
    2,243
    Likes Received:
    18
    Hi Paul

    sorry no

    Dave
    #10

Share This Page