1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A4 B8 ".0 TFSI exhaust mods

riggssuzuki Aug 9, 2012

  1. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    Does anyone know of a reasonably priced exhaust system or even just a 'back box' upgrade. I have looked at Milltek nd the like but struggle to justify the cost. I am basically after just a little more noise. Not boy racer screaming shouty but just a nice burble. This could probably be achieved with a back box but would appreiate the benefit of all of your experience. It needs to be a single exit dual tip not the dual exit (one ether side) type. Thanks in advance for your help.
     
  2. Pyeman

    Pyeman Member VCDS Map User quattro Audi A6 Audi Avant Owner Group TDi

    177
    17
    18
    I would go to a custom exhaust builder like powerflow and get what you want if price is problem.

    I have had 3 milteks on 3 different cars and they really do make a big difference. I sore a 17bhp increase on the dyno with the wifes Zafira GSi but that was a 3in turbo back system with 100cell sports cat!!! . I have a cat back on order now for the TDi and is being delivered next week. I'm now trying to find someone to custom make a Turbo to cat pipe right now and its hard.

    Have you heard the milltek?? Its something else.



     
    Last edited by a moderator: Aug 15, 2014
  3. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    What's ballpark figure for a bespoke system?
     
  4. Pyeman

    Pyeman Member VCDS Map User quattro Audi A6 Audi Avant Owner Group TDi

    177
    17
    18
    £400-£450 inc 100 cell sports cat when I looked at a powerflow system for my A4.
     
  5. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    Good grief thats a good price. Milltek are way much more than that!!!! WHere was that from?
     
    Marshy likes this.
  6. Mcdubber1

    Mcdubber1 Member

    255
    6
    18
    Jetex do a system for around the £400 mark depending whether you want it resonated or not. I may consider it in the future.
     
  7. Pyeman

    Pyeman Member VCDS Map User quattro Audi A6 Audi Avant Owner Group TDi

    177
    17
    18
  8. ScottishA4B9

    ScottishA4B9 Well-Known Member Team Daytona Audi A4 S-line owners group saloon TDi

    2,879
    726
    113
    Nearest dealer to us Kev is:

    TURRIFF TYRES
    5-11 School Hill
    TURRIFF, Aberdeenshire
    AB53 5TA
    TEL: 01888 562929
    Email: sales@turrifftyres.co.uk
     
  9. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    Cheers matey. Gonna have to have a wee trip methinks!!!!
     
  10. Pyeman

    Pyeman Member VCDS Map User quattro Audi A6 Audi Avant Owner Group TDi

    177
    17
    18
    Let us know how you get on!!!
     
  11. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    I got a quote for a bespoke cat back system for £380. Good or bad? Powerflo .
     
  12. Daggerit

    Daggerit Well-Known Member

    1,004
    112
    63
    I got a quote of £460 from Powerflow versus the £870 I'd have to pay for the Milltek version so I'd say that's pretty good personally! Lol.
     
  13. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    Was that for cat back or turbo back?
     
  14. Daggerit

    Daggerit Well-Known Member

    1,004
    112
    63
    That was only for a cat back system mate. That's all I'm looking for so I can hear a bit more of the V6 sound but not have my eardrums bleed... :)
     
  15. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    Anyone heard a cat back system on a 2.0 TFSI??? I dont want some screaming shouty thing that annoys, just a nice meaty burble..
     
  16. Daggerit

    Daggerit Well-Known Member

    1,004
    112
    63
    Just go in and see Powerflow, they custom make it to your request so you can just ask them to not make it too loud! That's what I'm going to do when it comes to it. :)
     
  17. nalsport

    nalsport New Member

    6
    1
    1
    I'm looking for a development car to produce our B8 2.0 TFSi Performance exhaust system on...
    Get in touch if you are interested.
    Cheers
    Nige
    BCS Automotive
     
  18. APAutomotive

    APAutomotive Shark Performance Shropshire

    82
    3
    8
    I've seen some powerflow systems, the quality of some of the systems I have seen is relatively poor. But you get what you pay for.
     
  19. ScottishA4B9

    ScottishA4B9 Well-Known Member Team Daytona Audi A4 S-line owners group saloon TDi

    2,879
    726
    113
    I would be interested, but looks like your quite far away! :(
     
  20. nalsport

    nalsport New Member

    6
    1
    1
    Cheers for your reply....
    Yes sometimes the logistical distance is the biggest object to overcome.
    :(
    Nige
     
  21. Daggerit

    Daggerit Well-Known Member

    1,004
    112
    63
    Cheers for the heads up! But is it really £400+ worse?! That's the price difference to the Miltek so would be nice to know...
     
  22. APAutomotive

    APAutomotive Shark Performance Shropshire

    82
    3
    8
    If you shop around you could still get a very good quality system, whether it be milltek or not.

    Milltek is not the only quality manufacturer out there, & you could still save £££'s on a rival system.
     
  23. Hesl

    Hesl Member

    43
    2
    6
    In my younger years I had a powerflow cat back exhaust on my Clio, the workmanship was ok but the bends were poor, bore was reduced considerably!

    Get what you pay for
     
  24. Mcdubber1

    Mcdubber1 Member

    255
    6
    18
    Like I said previously Jetex make systems for the B8 and seem to be a lot cheaper than milltek. Another option if you northern guys don't mind a bit of traveling is Stainless Creations in Falkirk. I've never used them myself but I have heard that their work is top notch and you can have the system made to your requirements.
     
  25. Daggerit

    Daggerit Well-Known Member

    1,004
    112
    63
    They are sounding like a better option than Powerflow boys then since no-one seems to have had a great experience with them from here! Haha. I've had a look at a few systems and they all seem to be about £7-800+ for cat backs which just seems ridiculously expensive to me so haven't just seen the Milltek and run away or anything! ;)
     
  26. Mcdubber1

    Mcdubber1 Member

    255
    6
    18
    Venom Motorsport do the jetex for your car for £413, it does seem too good to be true, maybe I'm missing something but if not then a good buy surely?
     
  27. nalsport

    nalsport New Member

    6
    1
    1
    We're still looking if anyone wants to help us develop the system.
    Cheers
    Nige
    BCS Automotive
     
    ScottishA4B9 likes this.
  28. riggssuzuki

    riggssuzuki Active Member

    494
    56
    28
    Would have happily obliged but too far away i am afraid.
     
  29. Daggerit

    Daggerit Well-Known Member

    1,004
    112
    63
    I'd managed to miss this actually! I'll have to have a look and see if I cant find some reviews or anything unless anyone on here has tried Jetex before?
     
  30. SLineMK

    SLineMK Member

    49
    8
    8
    Where are you Nige?
     

Share This Page