A4 B7 Wheels on an A6 C6?

[Pedrödelabongo]

As above - thinking of buying an A6 Avant.

I would ideally want to keep my 18" DTM wheels from my current A4 if they'll fit the A6.

Anyone know? Audi wheel sizes, centre bores, offsets and PCD's can get quite confusing!

 

[jojo]

The centre bore and stud pattern are identical for both car AFAIK, the only thing you need to know is if the offset is suitable for the C6 A6?

 

[Pedrödelabongo]

Cheers Jojo.

Anyone know the offsets, please?

 

[jojo]

Cheers Jojo.

Anyone know the offsets, please?

A4 DTM rims are 8J x 18", 5x112 with a ET43 offset

C6 A6 rims are 8.5J x 18", 5x112 with an ET38 offset.

It should fit on no problem, but I would run 10mm spacers all round personally with the DTM wheels, to make them ET33, which will make the narrower 8" wheel sit about the same as the standard 18" A6 rims.

 

[Pedrödelabongo]

Wow -thanks again, Jojo!

I was just having a scout round the tinterwebnet when you replied!

 

[desertstorm]

As above they will fit.
This is a good site that allows you to check the PCD and bolt size and gives you a rough idea on ET
http://www.wheelfitment.eu/car/Audi/A6 (2004 - 2011).html

The other thing to do to check offsets is look on partsbase.org for the car model you are interested in and check out the OE wheels offset.


http://www.partsbase.org/audi/audi-a4-avant-a4-eu-2006-60180-aluminium-rim/

Karl.

 

[Pedrödelabongo]

Thanks Karl - great stuff!