1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A3 pic + door switch question

Discussion in 'A3/S3 Forum (8L Chassis)' started by MsK, Jul 30, 2004.

  1. MsK
    Offline

    MsK New Member

    Joined:
    Oct 14, 2003
    Messages:
    7
    Likes Received:
    0
    My driver side door switch (controls indoor lights) is not switching off sometimes. Looks like when it is hot outside, it doesn't work that well. I got the car last october, no problem when it was cold. Is there a fix for it? I could not locate it, or is it inside the locking mechanism?

    I attached a picture, just got Eibach pro-kit installed, it's almost the same height now as before. Original springs have three or four (don't remember) pink dots, can they be identified by that marking? I couldn't see any part numbers on them. Maybe they were lower than normal already, I think OEM sport springs are -20mm?


    -MsK
    #1
  2. Mike.M
    Offline

    Mike.M Active Member

    Joined:
    Oct 11, 2003
    Messages:
    1,619
    Likes Received:
    3
    Springs need a couple of weeks to settle properly..........expect about a further 10mm of lowering to occur
    #2
  3. HTC
    Offline

    HTC Active Member

    Joined:
    Jan 11, 2004
    Messages:
    3,413
    Likes Received:
    1
    Do a search on this forum about door switch problems. A few people have had this issue.

    Unfortunately is requires the removal of the door lock to fix.
    #3

Share This Page