1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A3 2.0T maf readings Are they any good?

A3Craig Feb 8, 2013

  1. A3Craig

    A3Craig Member

    85
    3
    6
    A3 2.0t standard car, done a run in 3rd and 4th WOT and the highest reading i got was 143.89g/s, is this about right or ?
    thanks craig
     
  2. A3Craig

    A3Craig Member

    85
    3
    6
    Any ideas?
     
  3. A3Craig

    A3Craig Member

    85
    3
    6
    Bump
     
  4. Lewis583

    Lewis583 Active Member VCDS Map User

    956
    91
    28
    When in 3rd did you do the pull from ~2500rpm up to redline?

    I've just checked a log i did of mine (which as far as i know is stock) last October and I managed a peak of 169g/s at ~6300rpm

    So you may have a boost leak somewhere. Next step would be to check the boost requested vs boost actual.

    The measuring blocks I use to log boost pressure are, 002/115/118
     
  5. A3Craig

    A3Craig Member

    85
    3
    6
    Thanks for response, yea was til redline and I done requested and actual boost and they do match roughly when it spools it over shoots on requested but then settles
     
  6. A3Craig

    A3Craig Member

    85
    3
    6
    My mpg is averaging at 23mpg, that's me working it out, this is driving on decent roads without hard acceleration or braking, I would expect high 20's, anyone got standard maf readings or can tell me if mine is any good that would be appreciated
     
  7. A3Craig

    A3Craig Member

    85
    3
    6
    Forgot to say that's also on momentum 99 and tyre pressures are fine
     

Share This Page