1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A Xenon Question

Dean_ Apr 15, 2013

  1. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    I have xenon's retro fitted to my car and the main beam as in the one you can flash using the stalk is really poor and works off a bainet style bulb I just wondered if this is correct?

    the part number of one of the headlights is 8P0 941 003 AA

    I just wondered if anyone can help with this? they seem really poor

    the dipped Xenon beam is fine

    Thanks

    Dean
     
  2. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Messages:
    29,272
    Likes Received:
    1,685
    Trophy Points:
    113
    The bixenons use the same bulb, just a flap moves the beam higher as such, so which location on the headlight is being used when you flash with the stalk?
     
  3. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    its using the one beside the Xenon below the 501 sidelight

    I thought there must be something wrong
     
  4. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Messages:
    29,272
    Likes Received:
    1,685
    Trophy Points:
    113
    Coding issue is my 1st guess, assuming you have coded the correct module 09 for bixenons with separate drl in byte 21.
     
  5. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    Would it be best to post the coding for you to take a look at?
     
  6. NHN

    NHN Retrofitter - Audi - VW - Skoda - Seat Site Sponsor VCDS Map User

    Messages:
    29,272
    Likes Received:
    1,685
    Trophy Points:
    113
    Just try as advised 1st, to see if this corrects the issue.
     
  7. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    No problem thanks for the help will try tomorrow and post results
     
  8. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    just another quick question before I check the coding should I have wired in the 2 wires in the adaptor for DRL or for the high beam shutter as the instuctions from the net I looked at werent the clearest

    also will I need a new lightswitch in the car for DRL to work?
     
  9. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    Checked Coding byte 21 was incorrect now sorted thanks NHN for assistance. now just for the DRL to look at :)
     
    t8ups likes this.
  10. t8ups

    t8ups Site Sponsor Site Sponsor VCDS Map User

    Messages:
    1,852
    Likes Received:
    622
    Trophy Points:
    113
    i can supply the DRL's in xenons :)

    You would need to change the coding again to Bi xenon with LED DRL to have them working error free tho....

    Trups
     
  11. Dean_

    Dean_ New Member

    Messages:
    13
    Likes Received:
    1
    Trophy Points:
    3
    PM Sent :)
     

Share This Page