1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

A few A4\S4 Cab - Bose related Q's

Discussion in 'In-Car Entertainment' started by Steve_B, Aug 31, 2009.

  1. Steve_B
    Offline

    Steve_B Member

    Joined:
    Jun 27, 2009
    Messages:
    39
    Likes Received:
    0
    [Aug 31, 2009]
    Hello All...

    Anyone able to assist with a few Q's on the Bose setup installed in a 2004 S4 Cab - please :think:

    1) What is the power output of the Bose amp (I will guess quite low)

    2) Where is it located in a Cab?

    3) The Bose pin on the RNS-E, does this connect back to the amp or just an earth strap to configure settings in the HU?

    4) Is it true that line level inputs are presented at the amp from the HU?


    Cheers
    #1
  2. Ads

    Ads

    [Dec 28, 2014]

  3. AndyMac
    Offline

    AndyMac Moderator Staff Member Moderator

    Joined:
    Jun 10, 2003
    Messages:
    9,833
    Likes Received:
    32
    [Aug 31, 2009]
    1. 4 x 50w (peak, approx 4 x 18wrms) into 2ohms
    2. No idea
    3. The Bose pin just tells the HU to provide a totally flat EQ for the Bose system, so your bass & treble controls won't work properly. Snip the wire and get some decent highs & lows back.
    4. Both front & rear line levels are presented at the amp along with a remote on and all the speaker connections. Can't help you with a pinout though, but I'm sure someone has one. Or you can use the BLAU adapter at the HU and run proper RCA's, but only if you are going to completely bypass the Bose amp.
    #2

Share This Page