1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

5x100 to 5x112 hub adapters, where can I buy some???

Discussion in 'A3/S3 Forum (8L Chassis)' started by benh999, Nov 9, 2009.

  1. benh999
    Offline

    benh999 Member

    Joined:
    May 28, 2009
    Messages:
    198
    Likes Received:
    0
    Hi folks does anyone know where I can get some hub adapters to convert my S3 from 5x100 to 5x112

    Oh I've also noticed they range from 20,25 or 30mm which is the best width???


    Cheers

    Ben:icon_thumright:
    Last edited: Nov 9, 2009
    #1
  2. Dani_B19
    Offline

    Dani_B19 Audi-sports own special child.

    Joined:
    Nov 9, 2008
    Messages:
    7,274
    Likes Received:
    90
    DPM performance do them i think, there a sponsor on here.
    #2
  3. quattro rob
    Offline

    quattro rob Member

    Joined:
    Oct 31, 2009
    Messages:
    84
    Likes Received:
    0
    ebay m8.
    #3
  4. Sandip
    Offline

    Sandip Well-Known Member

    Joined:
    Nov 7, 2006
    Messages:
    2,381
    Likes Received:
    60
    I got mine from venom motorsport, the size of adaptor you get depends on the offset of the wheels your getting:icon_thumright:
    #4
  5. DPM
    Offline

    DPM Site Sponsor Site Sponsor

    Joined:
    Jun 10, 2006
    Messages:
    4,322
    Likes Received:
    54
    To get the correct size you'll need the offset of the new wheels your wanting to put on.

    Damian @ DPM Performance
    #5
  6. Routledge
    Offline

    Routledge Wind Deflector Trend-setter

    Joined:
    Nov 7, 2011
    Messages:
    395
    Likes Received:
    10
    Little bump on an old thread. My new alloys are 5x112 so will need hub adapters. What spacer will I need with a 45 offset?

    The wheels are 8J.
    #6
  7. <tuffty/>
    Offline

    <tuffty/> Badger 5 Edition Staff Member Moderator

    Joined:
    Sep 14, 2008
    Messages:
    15,773
    Likes Received:
    1,277
    You can work it out.... Avus are ET32 17x7.5, RSTT are ET33 18x8... so assuming you are after an OE offset you need 12mm spacers to achieve an offset of ET33...

    Add on top of that the normal 10mm front and 15mm rear spacer sizes on OE ET wheels to 'fill' the arches... you are looking at 22mm front and 27mm rear to emulate this..

    In real terms this equates to 20mm and 25mm as this is whats available...

    <tuffty/>
    #7
  8. Routledge
    Offline

    Routledge Wind Deflector Trend-setter

    Joined:
    Nov 7, 2011
    Messages:
    395
    Likes Received:
    10
    Phew, £163 penalty for picking the wrong PCD.

    Might see if they do a 5x100 version :p
    #8

Share This Page