1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

58 plate 2.0 tdi wont start

Discussion in 'Audi S4/A4/A4 Cab (B8 Chassis)' started by marv, Jul 13, 2013.

  1. marv
    Offline

    marv Member

    Joined:
    Mar 26, 2009
    Messages:
    255
    Likes Received:
    1
    hi there, well what a days started with the glow plug light flashing on dash, now the bloody thing wont start, scanned it comes up with fuel pressure faults saying, fuel pressue too high, too low? 4 faults all the same, fuel not coming out of fuel pump but its going in? any one had this or no of this problem

    thanks martin
    #1
  2. marv
    Offline

    marv Member

    Joined:
    Mar 26, 2009
    Messages:
    255
    Likes Received:
    1
    has anyone had the wrong fuel in there car? seems i have got some water in my fuel thats why cut out, cleaned out, new filter and new diesel, but still wont start, scanned it no codes in ecu,

    any ideas on what to do next?
    #2
  3. hollow
    Online

    hollow Active Member

    Joined:
    May 19, 2009
    Messages:
    666
    Likes Received:
    42
    Loosen the 4 injector pipes to get the fuel through .the cr engines are a real Pita to start if there is air in the lines .you could also try the old fashion way and spray easily start into the intake whilst cranking
    #3

Share This Page