1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

56mm bore wheels on an s3??

daz-20vt Jul 15, 2012

  1. daz-20vt

    daz-20vt Well-Known Member

    2,805
    572
    113
    Hi guys. Ive found some wheels i like and was wondering if they would fit on an s3. They are a 5x100 stud pattern but a 56mm centre bore. So will these fit on my car? Any help would be great thanks guys. Daz
     
  2. niallh

    niallh Member VCDS Map User

    213
    5
    18
    Nope, S3's have a 57.1mm centre bore. Would have to get the wheels milled to larger bore or get some custom spacers
     
  3. daz-20vt

    daz-20vt Well-Known Member

    2,805
    572
    113
    Thanks for your reply. I found that but was double checking. No idea if milling it out is safe or cost effective. Thanks again for your help
     
  4. Dani_B19

    Dani_B19 Audi-sports own special child.

    8,843
    296
    83
    Aslong as their is sufficient material around the bore i can see that removing 1.1mm of material will cause any issues.
     
  5. daz-20vt

    daz-20vt Well-Known Member

    2,805
    572
    113
    Your right. Ill get a quote and see. Thanks guys. daz
     
  6. s33nyboy12

    s33nyboy12 Well-Known Member

    1,484
    195
    63
    Out of interest .... What wheels?
     
  7. daz-20vt

    daz-20vt Well-Known Member

    2,805
    572
    113
    Lol. They are from an mg zt. They are 18inch and kind of like bbs ch's ive seen loads on ebay with good tyres go for under 200 quid. I quite like the design and im doing them gloss black which will cost another 200 min.
     

Share This Page