1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

440ft/lb from 2.0 TDI? Surely not...

N8 Nov 11, 2007

  1. N8

    N8 Kowalski Details VCDS Map User

    Messages:
    17,163
    Likes Received:
    718
    Trophy Points:
    113
    Hi Guys,

    I have been doing some very hard thinking after reading the November issue of max power the other day. I noticed this guy had a 1.9 TDI Ibiza Cupra and he was pushin out 230bhp & 365ft/lb!!! I was literally drooling at the mouth!! He had replaced the turbo with a garrett one, custom code jabbasport remap, air filter, milltek and a few other things, but overall it was the torque figure that impressed me the most.

    Then I started doing some research and came across this

    http://www.allardmotorcompany.com/filestore/list/documents/Allard-A3-TDI-quattro.pdf

    I was just wondering if you guys had seen this already? I don't want to go as hardcore as this, but I think I want more than the remap! I am going to ring this company in the morning and speak to them on the phone and my dream maybe cut short as my A3 is DSG.

    I was just wondering if anybody on this forum is pushing 200bhp+ from a TDI and also if they've changed their turbo?!

    Thanks for reading, all comments and opinions welcome!

    Nathan.
     
  2. mattfinn

    mattfinn Smoking is good for you

    Messages:
    826
    Likes Received:
    7
    Trophy Points:
    18
    I say do it, dervs are always more torquey, but start messing with the turbo, fmic, clutch etc and you will see some serious gains! Also plenty of black smoke!
     
  3. N8

    N8 Kowalski Details VCDS Map User

    Messages:
    17,163
    Likes Received:
    718
    Trophy Points:
    113
    yeh. fmic, clutch are necessary.
     
  4. Boydie

    Boydie Guest

    A clutch is definately needed - maybe even with just a remap in the 140pd's :( I'm starting to have doubts about mine!

    Looked into it though and an organic clutch will cost in and around £500 plus labour to fit

    but the problem with that is that you cannot uprate the flywheel so there will be a lot of pressure put on it if you upgrade the clutch!

    does anyone know what the torque is on the PD170???
     
  5. OutLore

    OutLore VOIP Dude

    Messages:
    1,206
    Likes Received:
    2
    Trophy Points:
    36
    IIRC, it's the same as the 140...
     
  6. h5djr

    h5djr Well-Known Member VCDS Map User Gold Supporter quattro Audi A3

    Messages:
    9,011
    Likes Received:
    1,409
    Trophy Points:
    113
    Not quite the same, according to the Owner's Manual:

    2.0 TDI - 140 = 320Nm at 1750-2500rpm

    2.0 TDI - 170 = 350Nm at 1750-2500rpm
     
  7. Boydie

    Boydie Guest

    Feck my car has 415NM :eek:
     
  8. N8

    N8 Kowalski Details VCDS Map User

    Messages:
    17,163
    Likes Received:
    718
    Trophy Points:
    113
    Yeh, is your A3 DSG boydie? No I remember, its manual. I want 240bhp ish now. And 380ft/lb, and do you know what boys, I'm gonna get it!
     
  9. emzino

    emzino Active Member

    Messages:
    1,231
    Likes Received:
    1
    Trophy Points:
    36
    Let's say you get 200+bhp and that much torque, what kind of cars would you be able to get past? I make it sound like a street race but it's not, it's only so I can understand what kind of league were talking about here
     
  10. Boydie

    Boydie Guest

    Car is manual and can't handle the amount of torque I have :( going to sort something out soon about it
     
  11. Crisis

    Crisis Member

    Messages:
    93
    Likes Received:
    0
    Trophy Points:
    6
  12. Boydie

    Boydie Guest

    I would expect a new clutch as well with that price!
     
  13. N8

    N8 Kowalski Details VCDS Map User

    Messages:
    17,163
    Likes Received:
    718
    Trophy Points:
    113
    I've just been speaking to Allard and they said the clutch is fine on the DSG for around 240bhp/340ft/lb! But we'll have to see. That kinda of package doesn't involve a new intercooler just new turbo and changed pipework for around £2500 I think. Looks like I know what I'm asking for christmas from the misses :)
     
  14. auroan

    auroan Active Member

    Messages:
    1,669
    Likes Received:
    5
    Trophy Points:
    38
    There are a few guys running 200 bhp + fabia vRSs over on Briskoda.
     
  15. N8

    N8 Kowalski Details VCDS Map User

    Messages:
    17,163
    Likes Received:
    718
    Trophy Points:
    113
    Ahhh! Briskoda is that a forum?
     
  16. Savage

    Savage Savage

    Messages:
    68
    Likes Received:
    0
    Trophy Points:
    6
    Quick search on google should tell you.
     
  17. N8

    N8 Kowalski Details VCDS Map User

    Messages:
    17,163
    Likes Received:
    718
    Trophy Points:
    113
    lol! Thanks Savage! :keule:
     

Share This Page